The right signals airport wind cone

2. A windsock is a conical textile tube that resembles a giant sock. Wind sleeves can be used as a basic guide for airport wind cone direction and speed, or as decoration. You should start planning your landing while still away from the airport. At a controlled airport, you should listen to the approach and tower frequencies, usually at distances of 20 miles or more, depending on the airspace around the airport. In uncontrolled fields, you should start listening to the Unicom frequency while you are at least 10 or 20 miles from the airport. However, in any case, you should develop a mental image of the traffic, the tracks in use, the flow of the traffic pattern and any other factor that may affect the way it will fly in the pattern.

3. In the controlled fields, the tower staff will guide you through the airspace, providing directions and altitudes. However, do not free yourself from the need to search for other aircraft, so do not become complacent and assume that you do not need to keep looking outside the plane. In uncontrolled fields, you may want to fly over the airport before entering the pattern to get an idea of the runway design, look at the airport wind sock to determine the wind direction, or observe other aircraft in the pattern. There are times when pilots do not use their radio, or the plane they fly is not equipped with a radio, so, even if you cannot hear any other traffic on the radio, be sure to look for another plane while flying the airport or get ready to Enter the pattern.

4. Before analyzing the sections of the pattern and the entry points, you should keep in mind that while normal patterns in uncontrolled airports are flown using left turns, known as left patterns, there are some airports that use patterns to the right. Residential areas, ground obstructions and towers in the vicinity of a pattern on the left can cause the airport to establish a pattern on the right. You should check the airport reference guides, available at most fixed-base operators (FBO), to find out if an airport has traffic patterns on the right or on the left. Depending on the design, some airports have patterns on the right for one runway and on the left for another, so if you fly to a field you are not familiar with, check with the Flight Service or check the airport reference guide before to take off

5. Windsocks are used to indicate wind speed and wind speed direction. Windsocks are generally used at airports to indicate the direction and strength of the wind to pilots and at chemical plants where there is a risk of gas leakage. Sometimes they are next to roads in windy places.In many airports, windsocks are illuminated at night, either by flood solar obstruction light at the top that surround it or with a pole mounted shining inside.

6. Airport Wind cone Product name : Wind cone Pole material : 304 stainless steel Pole size : 2,3,4,5,6,7m, custom Pole type : Telescopic & Non telescopic Base material : 304 stainless steel Base size : 25*25*12mm; 50*50*12mm, custom Base type : Tiltable & fixed Lights : 1PCS obstruction light + 2/4PCS flood lights Power input : AC220V & DC24V Windsock material : PVC, polyurethane coated nylon, custom

7. -: Official Contact Us :- Address: 6th floor area C & 7th floor area D, Senyang Electronic Science Park, West Area of Senyang High-tech Park, Tianliao community, Yutang Street, Guangming district, Shenzhen City, China. MR.XIAOYANG SHE Call - +86 755 2138 2032 Email - XIAOYANG1608@GMAIL.COM Go Enter - http://www.avialed.com/