210 likes | 340 Views
Features and News. zirkon / Nova17. zirkon (release 2.6) – console size. Up to 10 Channel modules + 3 Key-60. 1 central module. alternatively. Dummy. Key-60. zirkon XL. zirkon (release 2.6) – surface modules redesign f3. 950/55 zirkon - Central Module (f3)
E N D
Features and News zirkon / Nova17 zirkon features 2.6 / 2.7
zirkon (release 2.6) – console size Up to 10 Channel modules + 3 Key-60 1 central module alternatively Dummy Key-60 zirkon XL zirkon features 2.6 / 2.7
zirkon (release 2.6) – surface modules redesign f3 • 950/55 zirkon - Central Module (f3) • CF-Card Reader (formerly memory card) • 950/56 zirkon - XL Central Module (f3) • ALPS Fader (formerly P&G) • New button / Labeling for surround • 950/57 zirkon - Channel Module (f3) • fix foil with standard scale (no insert plates for scale) • 950/58 zirkon - Channel Module UK scale (f3) • 950/59 zirkon - 60 Key Module (f3) • 950/72-20 zirkon - Dummy Plate (f3) zirkon features 2.6 / 2.7
zirkon (release 2.6) – Surround sources zirkon features 2.6 / 2.7
zirkon (release 2.6) – New surface modules • Current status: project-specific / available on request • 950/73 channel module 2s • 950/76 monitor module 2s • no central module available – use of VisTool instead! zirkon features 2.6 / 2.7
Surround Source Down-Mix Stereo/Mono Bus zirkon (release 2.6) – Surround capabilities Surround Source(5.1 / 5.1+2) Stereo Source Mono Source Surround Bus (5.1 / 5.1+2) PanPotLf-C-Rf 1 : 1 L > Lf R > Rf zirkon features 2.6 / 2.7
zirkon – Surround PanPot • Full surround functionality incl. surround panning from Release 2.7! zirkon features 2.6 / 2.7
zirkon (release 2.6) - Direct outs Channel DSP Fader Output with gain Bus zirkon features 2.6 / 2.7
zirkon (release 2.6) – Maintenance • Update of surface modules without address switching • Config Data can be read from the mastercard for service purpose (backup - not to be edited) Configurationdata (binary) zirkon features 2.6 / 2.7
Control of Nova73 support from Release 2.6 Applications Source with external input (Tie-Line management) Source with input selection (External input matrix) External matrix control zirkon – Matrix Control zirkon features 2.6 / 2.7
Application: Fix source <> input relation Tie-line management Restrictions Max. 32 Tie-Lines to one matrix either Nova17 OR Nova73 Max 128 sources (incl. busses!) Mic amp remote control only with Nova17 zirkon – Matrix Control: Source with external input DALLIS Input Source 2 Nova73 DALLIS Nova17 Input Source 1 DynamicTie-Lines AES3, MADI, ATM Source 1 Source 2 Automaticcontrol zirkon features 2.6 / 2.7
Application: Sources with input selection Up to 256 groups with 256 signals Restrictions Only with Nova73 Special Signal addresses required Mic amp remote control only with DALLIS zirkon – Matrix Control: Source with input selection DALLIS Input 1 Nova73 DALLIS Nova17 Input 3 AES3, MADI, ATM Static Tie-Lines Manualcontrol Input 3selected Input 1selected zirkon features 2.6 / 2.7
Application: Control of external matrices Supports Nova73 and Nova17 in parallel Restrictions Decimal signals numbers required Max. address range is 1000 I/O zirkon – Matrix Control: External matrix control Nova73 DALLIS Nova17 Manualcontrol zirkon features 2.6 / 2.7
zirkon – Matrix Control: Overview zirkon features 2.6 / 2.7
zirkon – Matrix Control: Mixed modes with Nova73 • Problem: one zirkon does only support one Nova73 mapping table! • Two addresses for one signal required! DALLIS Nova73 Decimal # DALLIS Nova17 HEX ggssmm zirkon features 2.6 / 2.7
zirkon – more Release 2.6 features • Fader “hold mode” / start value default HOLDvalue (-12) trigger fader up/down <> toggle zirkon features 2.6 / 2.7
zirkon – more Release 2.6 features • Transparent transmission of digital signals • Logic state "PFL active" if one or more PFL is active • NTSC / PAL selectable • Status web page Shows • Active DMS and CAN clients • States of MADI ports • Logic function "blink" • Commentary field on the setup page • .... zirkon features 2.6 / 2.7
zirkon (release 2.6) – VisTool functionality • Meter paging • executed on master board – affect all VisTool clients! Ch. 1 - 20 Ch. 21 - 40 User def 1 User def 2 • Phase meter (on meter A / B) • Bus Assignment zirkon features 2.6 / 2.7
zirkon (release 2.6) – VisTool comfort Comfort • Drag & Drop • Free scalable Elements • Alignment of multiple elements • Cut / copy / paste • Multiple elements can be selected at the same time • Positioning grid zirkon features 2.6 / 2.7
zirkon (release 2.6) – VisTool changes • New registration procedure • Update requires renewal of registration • Start package 950/63 -> Edit + RT to run on the same PC • zirkonVis will be replaced by a fixed configured variant of VisTool (both: OnAir and Technic) • functionality remains the same zirkon features 2.6 / 2.7
Lawo AG Am Oberwald 8D-76437 RastattGermany Tel. +49 7222 1002-0Fax +49 7222 1002-24 Web: www.lawo.de zirkon features 2.6 / 2.7