1 / 31

AIRCRAFT GROUND DAMAGE PREVENTION

AIRCRAFT GROUND DAMAGE PREVENTION. Best practices for preventing business aircraft ground damage events. AAM Consulting. Introduction Purpose of program - reduce aircraft ground damage risk by providing “ best practices ” interventions

Download Presentation

AIRCRAFT GROUND DAMAGE PREVENTION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AIRCRAFT GROUND DAMAGE PREVENTION • Best practices for preventing business aircraft ground damage events

  2. AAM Consulting • Introduction • Purpose of program - reduce aircraft ground damage risk by providing “best practices” interventions • Focused audience - corporate flight and maintenance crews • Intended use - training and awareness tool • Self-audit tool - gap analysis, how do we manage these risks? (tbd) • Incident analysis flow chart -tool to look at human factors issues • What this is not - a tool to manage FBO’s • Size of the problem ? Many costs uninsured, estimated at over $100 million/year in direct costs

  3. AAM Consulting Most significant risk factors for ground damages • Towing • Ramp Movement • Ground Service Equipment • Hangar Movements

  4. AAM Consulting Most significant human factors for ground damages • Time Factors • Skill-based Errors • Customer Satisfaction • Direct Rule Violations • Environment Issues • Communication Errors • Loss of Situational Awareness

  5. AAM Consulting Risk Exposures

  6. AAM Consulting Maintenance Related Exposures • Mobile ladders/equip near aircraft control surfaces • Walk paths near aircraft storage positions • Use of non-rubber chocks while in hangars • Static wick protection warning devices • Complete a Job hazard analysis for specific aircraft maintenance exposures related to unique situations

  7. AAM Consulting Maintenance Related Exposures • Fire Protection - urea foam deluge systems should receive periodic inspection • Equipment that can move due to vibration or jet blast should be chocked or secured • Aircraft log books should be stored in a secure storage system when not in use • Clothing - Belt buckles covered and shoe protectors used if required.

  8. AAM Consulting Aircraft Movement • Use of at least 2 wing walkers while moving aircraft from or into hangars along with tug operator • Team completes an area risk assessment before moving aircraft • Perimeter floor marking that delineates limits of aircraft placement near hangar walls

  9. AAM Consulting Aircraft Movement • Hangar doors - securing methods to prevent inadvertent closure due to jet blast or high winds • Aircraft wings should not overlap other aircraft due to settling hazard • Hangar doors should be fully opened before aircraft movement • Aircraft should not be moved through propeller arcs

  10. AAM Consulting Aircraft Movement • Floor/ramp markings delineate best aircraft positions for entry or exit from hangars • Suggested hangar staking diagrams should be provided as visual aids • Overhead doors systems should have a periodic inspection process

  11. AAM Consulting Aircraft Movement • A Job hazard analysis should be completed for aircraft movement exposures in hangar areas related to unique situations • Written procedures for aircraft movement should be available in both the flight and maintenance operations manuals • Employees who move aircraft receive should receive training on company procedures

  12. AAM Consulting Aircraft Movement • A visual inspection of the aircraft should be completed before any tow initiates • The team should complete an area risk assessment briefing before moving aircraft - all sides of aircraft perimeter visually inspected for hazards • Towing equipment - tugs/Lektro tugs visually inspected, brakes checked, correct tow bar verified

  13. AAM Consulting Aircraft Movement • Towbars should be labeled as to aircraft type • Tugs are marked as to rated maximum loads • A post tow inspection should completed of aircraft • For aircraft pushes, the rear area must be inspected before movement • A written job hazard analysis should be completed for aircraft towing exposures

  14. AAM Consulting Aircraft Towing • Verification that aircraft brakes are off is completed before the tow or push is initiated • Employees who move aircraft should receive training on procedures • Aircraft are towed at a safe walking speed • Towing safety rules marked on tugs

  15. AAM Consulting Aircraft Towing • Large/heavy aircraft should require a person acting as a brake monitor during movement - in cockpit • If the tow operator loses sight of wing walker, an immediate STOP should occur • If there is any doubt as to having adequate space/clearance,an immediate STOP should occur

  16. AAM Consulting Aircraft Towing • Aircraft should only be moved by approved vehicles

  17. AAM Consulting Aircraft Taxi To Ramp Area • Pilots should visually scan the ramp for risks while taxing in • Ground marshaller’s should provide the correct hand signals - if in doubt, stop • While taxiing, the area should continually be scanned for threats such as: drain grates, narrow rows of positioned aircraft, ramp slope, blind spots, jet blast hazards, wind direction, loose chocks,vehicle movements

  18. AAM Consulting Aircraft Taxi To Ramp Area • Pilots should communicate (radio) with unicom or for taxi in assistance from FBO, etc. • Pilots should observe any hazards related to ground service equipment movements or positioning hazards - plan ahead for departure routes

  19. AAM Consulting Aircraft Taxi From Ramp Area • Flight crew should complete a visual inspection of the aircraft prior to departure • Pilots should ensure that wing walkers are used in confined areas or areas where marshalling person cannot see all positions of the aircraft. • Pilots should visually survey the ramp area for risks during pre-start and taxi

  20. AAM Consulting Aircraft Parking • Warning cones should be placed at wing tips and tail • Potential jet exhaust blast hazards should be planned for • Aircraft should be positioned to avoid wing overlap hazards • Triple chocks should be placed at mains and nose gear for overnight parking

  21. AAM Consulting Aircraft Parking • The main gear should be chocked at all ramp parking situations • A ground marshaller should be used to aid for taxi in and departure from parking spots • Ground air stair mats should be removed before engine start

  22. AAM Consulting Ground Service Equipment • Fuel Trucks should be chocked when servicing aircraft • All mobile equipment should be positioned to not face aircraft • Ground power units should not be positioned under tail sections and must be chocked • Special precautions should be followed to insure the removal of GPU plugs before the unit is moved • Tugs and other types of GSE such as golf carts should be shut-off, parking brakes set, and chocked when left unattended

  23. AAM Consulting Towing Communications • Will you be towing our aircraft today? • Yes - Inform ground crew: “Be advised the brakes are off and here is a copy of our company’s preferred for towing and securing our aircraft.” • No - Present the company’s written suggested procedures for ground chocking and protection - cones, etc • “Are you familiar with this type of aircraft?” • Yes - Assist as a spotter • No - Ask that A/C remain where it is • “Do you have room for our A/C in your hangar?” • Yes - Present the company’s written suggested procedures for hangar movements - chocks, walkers, speed, etc.

  24. AAM Consulting Towing Communications • “Have you been trained to tow this type of aircraft?” • No - Ask that A/C remain where it is • “Will the aircraft be towed at times when the flight crew is not available?” • Yes - Ask that wing walkers be present at that the perimeter of the aircraft be cleared before movement. Suggest the use of a brake monitor on heavy aircraft.

  25. AAM Consulting Fueling Communications • “Are you familiar with the fueling procedures for this type of aircraft?” • No - Present the company’s written suggested procedures that outline fueling methods • Yes - If time permits, assign a pilot to observe fueling • As much as practical, fueling should only be conducted when a flight crew member or employee of the aircraft’s owner is present

  26. AAM Consulting What can happen? • No Chocks on a sloping ramp...

  27. AAM Consulting What can happen? • Unauthorized vehicles operations on the ramp...

  28. Incident • For Each • At-Risk Behavior • For Each UnSafe Condition • Yes • No • Did Condition Result from a Behavior? • Forced Behavior • Was the Behavior Out of Control of the individual? • No • Unforced Behavior • Was the Behavior Simply an Error by the • Individual? • Influenced Behavior • Was there a Risk/Reward Influence on the Behavior? • No • Yes • Yes • Yes • Explore “Hard” System Issues • Workstation Design • Tool/Equipment Design • Tool/Equipment Availability • Explore “Soft” System Issues • Procedures • Training • Human Factors • Conduct an Analysis to Determine What Drives the • At-Risk Behavior • Make Improvements to: • Procedures • Training • Human Factors • Redesign Workstation • Redesign Tool/Equipment • Purchase Necessary Tool/Equipment • Identify and Implement Antecedents and Consequences that Support Desired Behaviors and Reduce At-Risk Behaviors Ground Damage Incident Review Process

  29. AAM Consulting Self-Audit Gap Analysis... • We have written SOP’s in place? Y N • Employees trained on procedures Y N • Employees provided risk awareness training Y N • Incident investigations conducted Y N • We have completed a risk assessment Y N • Compliance evaluations completed Y N

  30. AAM Consulting Self-Audit Gap Analysis... • We have the correct ground equipment Y N • We monitor FBO actions Y N • We have an accountability system in place Y N • Access to ramp areas is controlled Y N • Crews have ground damage awareness training Y N

  31. AAM Consulting Thank you...

More Related