1 / 21

Mesh Control through Boundary Layers and Face Vertex Types

Mesh Control through Boundary Layers and Face Vertex Types. Face Vertex Type Basics. All vertices that are connected to a face are assigned initial face vertex types based on default angle criteria between the edges connected to the vertex.

aprilk
Download Presentation

Mesh Control through Boundary Layers and Face Vertex Types

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Mesh Control throughBoundary Layersand Face Vertex Types

  2. Face Vertex Type Basics • All vertices that are connected to a face are assigned initial face vertex types based on default angle criteria between the edges connected to the vertex. • Combination of vertex types describes the face ‘shape.’ • Face vertex types are used automatically to determine all quad face meshing schemes except the quad-pave scheme. • The tri meshing scheme also does not use face vertex types. • Changing vertex types can help you create a structured mesh, control the mesh or help facilitate generating a hex mesh. • For the majority of models, vertex types don’t need to be changed.

  3. E E E S S S C C C R R Vertex Type Characteristics • End (E) • 0 < Default Angle < 120 • zero internal grid lines • Side (S) • 120 < Default Angle < 216 • one internal grid line • Corner (C) • 216 < Default Angle < 309 • two internal grid lines • Reverse (R) • 309 < Default Angle < 360 • three internal grid lines

  4. Modifying Face Vertex Types • Face Vertex Types can be changed from default setting: • Automatically, by enforcing certain meshing schemes in face and volume meshing. • Can sometimes result in undesirable mesh. • Manually, by direct modification in the Face Vertex Type form. • Select Face • symbols appear in graphics window • Select New Vertex Type • Select Vertices to be affected • Vertex Types can be applied to just Boundary Layers as option. • A vertex can have multiple Types; one per each associated face. • For a given set of face vertex types, Gambit will choose which meshing scheme to use based on predefined ‘formulas.’

  5. Map Scheme: 4*End + N*Side Periodic Map Scheme: N*Side Project intervals can be specified for more mesh control. S E + E E E E E E E Formula for Map Scheme

  6. By manually changing vertex types In Set Face Vertex Type form, change vertices (default) to “Side” (example) Open the Face Mesh form and pick the face (GAMBIT should automatically select the map scheme) By enforcing the Map scheme In Face Mesh form, change the scheme from default to “Map” and “Apply” (GAMBIT will try to change the vertex types so the scheme is honored) E E S E S E S E E E E E S S C C E E E E E E E E How to Make a Face Mappable Default Map: 4*End + 4*Side Map: 4*End default

  7. Submap Scheme: 4*End + L*Side + M*(End + Corner) + N*(2*End + Reverse) additional terms when interior loops exist Periodic Submap Scheme: N*Side + M*(End + Corner) where M >2 additional terms when interior loops exist E S E E E C C C E C C S E E E E C C C E E E C C C E C C E E E E Formula for Submap Scheme S S + +

  8. By manually changing vertex types Consider which vertex should be changed to “Side” In Set Face Vertex Type form, change vertex (default type) to “Side” By enforcing the Submap scheme In Face Mesh form, change the scheme from default to “Submap” and “Apply” (GAMBIT will try to change the vertex types so the scheme is honored) User has less control - resulting mesh may be undesirable E E E E E E E E S R R R E E E E E E E E S E E E How to Make a Face Submappable Submap: 4*End + Side + (2*End + Reverse) ? default

  9. Tri-Primitive Scheme: 3*End + N*Side To mesh a face with the tri-primitive scheme: Manually, change one of the vertex types to “Side” in this example The Tri Primitive scheme can not be enforced E E S E E E E S E E E E Tri-Primitive Scheme default

  10. Quad:Pave Scheme All vertex types of the face are ignored The sum of all elements on the edges of the face must be even. Mesh inner faces first if possible to prevent from ‘locking’ into odd number intervals on boundaries. No guarantee of a symmetric mesh on a symmetric geometry Tri:Pave Scheme No even number restriction Use boundary layers for better mesh near boundaries Use sizing function and edge mesh grading for controlling cell size distribution. Edge mesh grading alone results in poor quality mesh. Meshing Faces with Quad and Tri Pave Schemes

  11. T E S T T N E T E Meshing Faces with Hybrid Quad/Tri Schemes • Quad/Tri: Tri-Map formula: 2*Triangle • The face vertex types need to be manually changed to Triangle (T) and the “Tri-Map” scheme must be selected. • Quad/Tri: Pave • All vertex types are ignored except Trielement (T) and Notrielement (N) • Trielement (T) will enforce a triangle • Notrielement (N) will avoid a triangle • Quad/Tri: Wedge • Used for creating cylindrical/polar type meshes • The Vertex marked (T) is where rectangular elements are collapsed into triangles

  12. How to Make a Volume Mappable • Three options to map a volume: • Enforce the map • Manually change the vertex types on all faces so they are mappable • Enforce the map on the faces E Example: map the faces E E E E S E E enforce the map E E Map S E default E manually change the vertex types E E E

  13. How to Make a Volume Submappable • Three options to submap a volume: • Enforce the submap • Manually change the vertex types on all faces so they are mappable and/or submappable • Enforce the submap on the faces Example: manually change the vertex types E E E E E E C E C S S E S E

  14. How to Make a Volume Cooperable • Three options to cooper a volume: • Manually change the vertex types on the side faces so they are mappable and/or submappable • Pick the source faces • Enforce the map or submap on the side faces Example: manually change the vertex types S E E S S E C E E S E E

  15. Boundary Layers • Boundary layers are layers of elements growing out from a boundary into the domain. • Produces high quality cells near boundary. • Allows resolution of flow field effects with fewer cells than would be required without them. • In general, boundary layers are attached to: • edges for 2D problems • faces for 3D problems • complicated 3D shapes may require boundary layer attachments to edges.

  16. Create Boundary Layers • Create Boundary Layer Form • Show Option: toggles display of temp. boundary layer • Useful for complicated models • B.L. can be defined using Uniform or Aspect Ratio based algorithm • Definition Inputs (3 of 4 inputs required) • First row: height of first row of elements (a) • (or starting aspect ratio) • Growth factor: factor for geometric series (b/a) • Rows: total number of element rows • Depth: total height of boundary layer (D) • (or ending aspect ratio) • Internal continuity and Wedge corner shape • Transition Pattern • Reduces number of elements in ‘flow’ direction. • Not to be used with tets; watch for highly skewed cells.

  17. E E E E R C E E S E Attachment • General • Attach to: • Edges for 2d problems • Faces for 3d problems • Arrows point to center of associated face or volume. • Boundary layers are initially displayed in orange to indicate that it is temporary. • Temporary boundary layers update immediately with change in definition. • Boundary layer becomes permanent (displayed as white) upon Apply. • Edges • Boundary layer mesh in region near vertices is defined by vertex type. • End: mesh overlaps • Side: angle bisected • Corner: angle divided into thirds • Reverse: angle divided into fourths.

  18. Boundary Layers and End Vertex Type • BL mesh butts up against adjoining edge • BL mesh uses adjoining edge’s mesh if pre-existing • If BL is attached to adjoining edge on a face, a block of “overlap” elements is created where the two BL meshes meet

  19. Wedge Corner Shape • At corner or reversal vertices, wedge corner shape option is applicable. • ON  Wedge shape • OFF  Block shape ON OFF

  20. Attachment to Faces • A boundary layer attached to a face may ‘imprint’ the adjoining faces. • The imprint is displayed graphically on adjoining faces. • Imprinting will depend upon b.l. attachments of adjoining faces and state of internal continuity. • If adjoining faces do not have b.l. attachments- • Attaching boundary layer to face: • Gambit checks angle bounded by attachment and adjoining faces. • Will imprint (become visible) the adjoining faces if angle is less than default angle (135o). • Will not imprint adjoining faces if angle is larger than default. • b.l. is still created but may not impact mesh. • If adjoining faces have b.l. attachments- • Imprinting and overlap region depends upon state of internal continuity.

  21. Internal Continuity Internal Continuity “ON” • Internal Continuity • Allows boundary layers to be formed with no crossover regions (vertices become sides) • Must be ON for tet/hybrid meshing Prism Growth in Boundary Layer Internal Continuity “OFF”

More Related