60 likes | 61 Views
The Antlia Engineering Works opened its doors with owning the entire process from manufacturing to delivery ensuring utmost quality and customer gratification. Antlia pumps are safe-efficient-reliable and any broken parts can be easily replaced with genuine Antlia spares. As a result, they are used in a wide range of industries to handle different materials such as chemicals, crude oil, mining, food, beverage, paints and many more. For more information: http://antliaworks.com/
E N D
Introduction • Pumps play an important part in the success of a wide range of markets. May it be wastewater treatment or pharmaceutical production or carpet and chemical manufacturing; pumps keep a lot of industries running at top speed. • One of the reasons why air-operated double-diaphragm (AODD) pumps are used so prominently in numerous differing kinds of industries is because they provide advantages other sorts of pumps can’t. AODD Pump is been through many innovations in technology and style since their introduction to the market. They’re now a key player in the pump selection process. • AODD pumps provides a seal less, positive displacement alternative to centrifugal pumps. they're used for variety of applications across a good range of industries including oil and gas, food processing, chemicals, paints, electronics and pharmaceuticals.
AODD PUMPS ARE RUN-DRY CAPABLE • AODD Pump Manufacturers makes sure that AODD pumps are ready to dry out for an extended time without damage to the pump or its components. it's quite common that pumps dry out , especially during sump dewatering, tanker unloading or tank over applications. • Other sorts of positive displacement pumps could also be damaged by running dry and, ultimately, their service life are going to be shortened.
AODD PUMPS DEADHEAD SAFELY • Deadheading occurs once the fluid pressure is adequate to the air inlet pressure which is powering the pump. • When a you close fluid side of the pump, the pump will build pressure until it's equal and stops pumping. In a valve once the valve is opened on the discharge fluid side of the pump, it will start pumping again. A lot of other pumping technologies require circulation loop or special controls to permit for the pump to deadhead. • AODD pumps from AODD Pump Manufacturers in India are an excellent option for applications that are intermittent and need frequent deadheading.
AODD PUMPS HAVE EXCELLENT CHEMICAL AND TEMPERATURE RESISTANCE • AODD Pump Manufacturers in Mumbai can manufacturer AODD radiates of a good range of materials in order that they can handle almost any fluid. • Many pumps are offered with wetted component materials made up of stainless steel, Alloy C, cast iron, aluminum, polypropylene, PVDF and acetal. • AODD pumps can easily handle up to 104 degrees Celsius heat and also most probably also beyond it. They will also handle cold temperatures. If you are going over 104 degrees Celsius or below the melting point.
AODD PUMPS ARE EASY TO INSTALL • AODD pumps doesn't get to be laser-aligned and it also don't require complex controls to work effectively—they simply need air supply to power the pump. • The pump are often controlled with a valve on the fluid discharge or by controlling the air coming into the pump. Antlia Engineering Works are one of the best AODD Pumps, Peristaltic Pump Manufacturers in India