1 / 20

Significant Figures

Significant Figures. Every measurement has a limit on its accuracy based on the properties of the instrument used. we must indicate the precision of the measurement by using the correct number of significant figures Precision – the consistency of a measurement, how repeatable it is.

anne
Download Presentation

Significant Figures

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Significant Figures • Every measurement has a limit on its accuracy based on the properties of the instrument used. • we must indicate the precision of the measurement by using the correct number of significant figures • Precision – the consistency of a measurement, how repeatable it is

  2. Can you name this significant figure?

  3. Object A, measured with Ruler I should be recorded as ________   but as measured with Ruler II should be recorded as _________ Check your answer with the person next to you

  4. Object B, measured with Ruler I is  _______________ Object B, measured with Ruler II is _______________ Check your answer with the person next to you

  5. Which ruler is the most precise? Which ruler is the least accurate?

  6. What happens if an object is directly on the 3 of the ruler? What decimal place to record?

  7. what is its smallest division?  _________ How should measurements using Ruler IV be recorded (to how many decimal places)? ________ Check your answer with the person next to you

  8. Rules for SigFigs • Nonzero digits are ALWAYS significant • Zeroes are only sometimes significant… • All final zeroes after a decimal point are significant • Zeroes between two other significant digits are always significant • Zeroes used soley as placeholders are NOT significant • Zeroes between a decimal point and a nonzero digit are NOT significant.

  9. Some examples 0.0860 m            1.0030 s        0.000010203 m   $18,000$18,000.00$18,000.     0.10001 cm          

  10. 1. Give the number of sig. fig. and the number of decimal places in each of the number below. •   a)  72.32   b)  10.002   c)  0.003   d)  0.00170   e)  3,000   f)  3,000.   g)  3,000.00

  11. 2. These numbers have ambiguous zeroes. Remove the ambiguity by expressing them in scientific notation. •   a)  42000 in 2 sig. fig.   b)  42000 in 3 sig. fig.   c)  42000 in 4 sig. fig.   d)  2100 in 3 sig. fig.   e)  790,000 in 4 sig. fig.   f)  3800 x 10-7 in 3 sig. fig.

  12. When you perform any arithmetic operation,it is important to remember that the result can never be more precise than the least precise measurement.  

  13. Adding and Subtracting • To add or subtract measurements, first perform the operation, then round off the result to correspond to the least precise value involved.  For example, add these values: • 24.686 m + 2.343 m + 3.21 m   =    30.239 m 3.21m Least precise measurement? ______ Round answer to _______ 30.24m

  14. Multiply and Divide • After performing the calculation, note the factor that has the least number of significant digits.  Round the product or quotient to this number of digits.  For example, multiply • 3.22 cm by 2.1 cm  =  6.762 cm2 • corrected to  _________ 6.8 cm2

  15. Divide these two measurements and report answer with correct number of significant digits • 36.5 m divided by 3.414 s  = 10.691 m/s corrected to ________ 10.7 m/s

  16. Let’s review… • Some Practice problems 1) 2804m            2)   2.84km   3)0.029m 4)0.003068m  5)   4.6x105m  6)   4.06x105m 7)   750m         8)  75m          9)75,000 m 10)   75,000. m   11)  75,000.0m  12)  10 cm

  17. Answers • Some Practice problems • 1) 2804m            2)   2.84km   3)0.029m • 4)0.003068m  5)   4.6x105m  6)   4.06x105m • 7)   750m         8)  75m          9)75,000 m • 10)   75,000. m   11)  75,000.0m  12)  10 cm

  18. More practice! 1)      6.201 cm  +  7.4 cm  +  0.68 cm  + 12.0 cm  =  ? 2)     1.6 km   +   1.62 m   +    1200 cm   =   ? 3)     8.264 g   -   7.8 g   =    ? 4)     10.4168 m   -   6.0 m    =   ? 5)     12.00 m   +  15.001 kg   =   ? 6)     131 cm  x  2.3 cm   =   ? 7)     5.7621 m  x  6.201 m   =  ? 8)    20.2 cm   divided by  7.41 s   =   ? 9)    40.002 g  divided by  13.000005 ml  =  ?

More Related