How do I connect my Netgear Wi-Fi Extender?
To find your Extender's Wi-Fi network password Use a PC or wireless device that's connected to your Wi-Fi Range Extender via wireless connection or Ethernet. Launch an Internet browser. In the address bar type www.routernetlogin.com Log in using your Username and Password. Click on Settings and then on Wireless. Under General, go to “Wi-Fi Password”. If it says same as existing network password, it is using the same Wi-Fi password as your main Wi-Fi router. If it says to use a different password, it will show the type of password under Network Key and the Security Type. How do I connect Netgear Wi-Fi Extender using WPS? Press and hold the WPS button on the Extender for 5 seconds. The WPS LED on the front should blink. Within 2 minutes, press the WPS button on your gateway, wireless router, or access point. Wait for at least 2 minutes while the extender connects to your existing wireless network. How do I upgrade firmware on my NETGEAR Wi-Fi Range Extender? Open a web browser from a PC or mobile device that is attached to your extender’s network. Enter your admin email address and password and click on Login Button. If your browser displays the Menu icon, click on it. Choose Firmware Update Click on Check Online. If you still face any problem, you can contact Support for Netgear Extender Customer at Netgear Router Customer Assistance for help. If you can’t resolve your problems, feel free to dial our toll-free number available on the website or you can Support for Netgear Wi-Fi Extender at www.routernetlogin.com
63 views • 6 slides
