1 / 21

The Florida Lime Study

The Florida Lime Study . Rao Mylavarapu, Nancy Wilkinson, William d’Angelo, Jennifer Frey, Cassandra Admire, Alex Bournique, Murthy Kadiyala Soil & Water Science Department, IFAS University of Florida. Objective.

andie
Download Presentation

The Florida Lime Study

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Florida Lime Study Rao Mylavarapu, Nancy Wilkinson, William d’Angelo, Jennifer Frey, Cassandra Admire, Alex Bournique, Murthy Kadiyala Soil & Water Science Department, IFAS University of Florida

  2. Objective • Screen methods for determination of lime requirement for acid-mineral soils of Florida • Methods • University of Kentucky - Sikora method • Auburn University - Huluka method • Clemson University - Sikora-Moore method • University of Georgia - Single Titration method

  3. Justification • The current Adams-Evans Buffer method involves p-Nitrophenol, an environmentally hazardous chemical • An environmentally friendly alternative method is needed • Primary need, however, is to identify a method that will be effective for acid-mineral soils of Florida

  4. Materials and Methods • Collected 12 soil samples from 10 different counties- Bradford, Clay, Columbia, Highlands, Hendry, Lake, Marion, Sumter, Putnam (3 samples) and Jackson counties • Samples were dried, sieved through 2.0mm mesh • The 4 methods were replicated 4 times • Water pH (1:2) was determined on all samples • Soil pH ranged from 4.0 to 5.4 • AE-Buffer pH was determined and the Target pHs were identified as 6.5 and 6.8

  5. Materials and Methods • Four replicates of each sample, weighing 200 grams, were sent to each state Lab • Each Lab ran their preferred method and determined the lime requirement and returned the data • Calcitic lime was added to all cups as per the recommendation from each of the state labs and the cups were incubated in the dark for a total of 63 days

  6. Preparation • The experiment was replicated 4 times • 200 g of sample was weighed into each cup • Labeled with county, Lab, lime rate and replicate • 12 counties labeled from A to L • 4 Labs were labeled I, II, III, IV • Lime rates for a Target pH of 6.5 were labeled as 1 and for a Target pH of 6.8 were labeled as 2

  7. Preparation • Pure CaCO3 was added to the cups as prescribed by each Lab for Target pHs of 6.5 and 6.8, after converting from Lb Acre-1 to g cup-1 • Soils was stirred well for homogeneity • All the sample cups were maintained at 30% moisture content for the entire duration of incubation by estimating the bulk density and pore space • The samples were weighed regularly and water was added using syringe inserted into a straw, which stayed inserted thru the incubation period, to bring the moisture content back to 30%

  8. Incubating cups were checked for any moisture loss through evaporation by weekly weighing Water was injected slowly into the incubating cups by a syringe inserted into a straw reaching the bottom of the cups to replace the moisture

  9. Incubation • All samples were kept in the dark and in a climate-controlled area at 72°F for 63 days for incubation

  10. Post-incubation • All the straws were removed and the soils were stirred and let them dry for a couple of days • Determined the water pH (1:2) by subsampling the cups for 20 grams of soil and adding 40 ml of water.

  11. Results

  12. Lime requirement calculated for 6.5 target pH by different methods

  13. Lime requirement calculated for 6.8 target pH by various methods

  14. Measured pH after application of lime for target pH of 6.5

  15. Measured pH after application of lime for target pH of 6.8

  16. Average pH values measured after lime application

  17. Average target pH values measured in various county samples

  18. Take home messages • All the methods have over-estimated the lime requirements as indicated by the increase in pH beyond the Target pH at the end of the incubation period • Differentials in Target pHs were not realized even with different lime recommendation amounts, for any of the methods • Soil pH determinations showed a high amount of variation, with possible statistical significance in certain cases • Other soil physical and chemical parameters may be influencing the lime efficacy • Field calibrations may further increase the variability

  19. Conclusion • There is a method that Florida can use…… OR • There is no method that can be clearly identified as suitable AND Repeat the study with a few modifications !

More Related