Download
1 / 2
20 likes | 26 Views
Anaghasystems is the Leading Manufacturer and supplier of ESD Products, ESD Aprons, Anti Static Shoes, ESD Slippers, ESD Wrist Straps located in Hyderabad.
E N D
Leading ESD Aprons Manufacturers and Suppliers in Hyderabad. ANAGHA Systems is one of the leading manufacturers and supplier of ESD Aprons and Anti-Static Aprons in India. Our high quality, tailor fit designed aprons are available in various sizes as per user requirement. ESD / Anti-Static Aprons are made of fabric consisting of 98% Polyester & 2% Conductive Carbon Nylon Fibers in the form of square conductive grid spaced every 5mm to dissipate static charge at higher rate. The conductive nylon fibers are woven in a chain-link design throughout the material, providing continuous and consistent charge dissipation.Our aprons are compatible for Cleanroom and Static Controlledenvironments also. Pockets &ESD Logo are included. ESD / Anti-Static Aprons are suitable for ESD Protected & Static Controlled Areas, Electronics Manufacturing Shop floors, Service Centers, Research & Development Labs, Mobile Repairing Centers, Semi-Conductor Labs, Cleanroom environments & Pharmaceutical Labs too. ESD /Anti-Static Aprons are an ESD protective product that should possess the following ESD control characteristics: Antistatic low-charging so they minimize the generation of electrostatic charges Dissipative so when grounded they will remove charges to ground; Shielding creating a “FaradayCage” effect so they will restrict charges generated on the user’s clothing to the inside of the ESD / Anti-Static Aprons Groundable so the user can easily and reliably connect them to ground. Installation and grounding of ESD / Anti-Static Aprons: Follow the directions below for proper installation and grounding of the ESD / Anti-Static Aprons: Put on the ESD / Anti-Static Apron and fasten all of the snaps on the front of the lab coat, making sure that clothing is not exposed outside of the apron. Throughout use, it is essential that the conductive cuff is in intimate contact with the wrist skin. The conductive cuff should never be allowed to be pulled up and over the shirt sleeve. Ground the ESD / Anti-Static Apron. A popular way to ground an ESD / Anti-Static Apron is with a coiled cord either attached to a snap on the waist area of the apron via a wrist strap snapped to the inside cuff of an ESD / Anti-Static Apron. If none of these methods are suitable, the lab coat should be grounded via the person’s wrist removing charges via ESD footwear to ESD protected flooring. ESD /Anti-Static Aprons are a conductor and therefore should be grounded. If not grounded, the ESD garment can be a potentially threatening isolated charged conductor. If an operator is wearing an ESD / Anti-Static Apron but is not electrically connecting the apron to either their body’s skin or ground, then charges on the aprons may have nowhere to go or discharge to. Testing of ESD / Anti-Static Aprons Panel-to-panel conductivity is essential to ensure portions of the aprons are not left as isolated charged conductors. A Resistance Test Kit can quickly measure resistance of the fabric and ensure panel-to-panel conductivity by placing five pound electrodes on different fabric panels. Find here ESD Product Manufacturers in Hyderabad. Specifications: Sizes: S, M, L, XL & XXL Colors: White, Light Blue, Navi Blue, Pink, Yellow & Green Type: 5 MM Grid Material: 98% Polyester & 2% Conductive Carbon Fiber Superior air permeability & particle filteration Surface Resistance: 10⁶ - 10¹º Ω Decay Time: ±0.5 Sec
