1 / 65

Extended Learning Module J (Office 2010 Version)

Extended Learning Module J (Office 2010 Version). Implementing a Database with Microsoft Access. SOLOMON DATABASE. The steps to creating a database are Define entity classes and primary keys Define relationships among the entity classes Define fields for each relation (file)

amora
Download Presentation

Extended Learning Module J (Office 2010 Version)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Extended Learning Module J (Office 2010 Version) Implementing a Database with Microsoft Access

  2. SOLOMON DATABASE • The steps to creating a database are • Define entity classes and primary keys • Define relationships among the entity classes • Define fields for each relation (file) • Use a data definition language to create the database, which is the focus of this Module

  3. SOLOMON DATABASE • In Figure J.1 (p. 474) on the following 3 slides, we’ve recreated the correct database structure from Extended Learning Module C • Revisit Module C if you need a refresher

  4. SOLOMON DATABASE

  5. SOLOMON DATABASE

  6. SOLOMON DATABASE

  7. Creating Solomon’s Database • Data dictionary - contains the logical structure for the information • To create the Solomon Enterprise database: • Start Microsoft Access • Click on Blank Database in the upper left corner of the screen • Enter Solomon Enterprises.accdb as the database name • Click on Create

  8. Creating Solomon’s Database 1. Create a new database by clicking on Blank Database 2. Enter SolomonEnterprises.accdb

  9. Creating Solomon’s Database • Our recommendation: Create a relation (table) in Design view: • Must switch from Datasheet View to Design View • Click on View in the upper left corner and then Design View • Enter a table name • Use the Design View to enter the specifications for the table

  10. Creating Solomon’s Database This is Design View – our recommendation for creating the tables in a database To switch to Design View, click on View and then Design View

  11. Creating the Raw Material Relation • Enter the four fields of the Raw Material relation • Raw Material ID • Raw Material Name • QOH • Supplier ID • Click on the Raw Material ID row and then the key button to designate Raw Material ID as the primary key

  12. Creating the Raw Material Relation Primary key identifier and the Primary key button Integrity constraints for Raw Material ID

  13. Creating the Concrete Type Relation The fields for Concrete Type Primary Key Integrity Constraints

  14. Creating the Bill of Material Relation • We created (in Extended Learning Module C) the Bill of Material relation to eliminate the many-to-many relationship between the Concrete Type and Raw Material relations

  15. Creating the Bill of Material Relation • The Bill of Material relation has a primary key composed of two fields (composite primary key): • Concrete Type • Raw Material ID • Composite primary key - consists of the primary key fields from the two intersecting relations

  16. Creating the Bill of Material Relation Composite primary key

  17. DEFINING RELATIONSHIPS WITHIN SOLOMON’S DATABASE • The final structural task is to define how all the relations relate to each other • That is, link primary and foreign keys • Foreign key - a primary key of one file (relation) that appears in another file (relation)

  18. Primary and Foreign Key Logical Ties

  19. Defining Relationships between Relations • To create relationships • Click on Database Tools in the menu area and then click on the Relationships button • Make each relation appear on the palette by highlighting each relation name and clicking on Add • Then click on the Close button

  20. Defining Relationships between Relations Select tables and click on Add Relationship palette

  21. Defining Relationships between Relations

  22. ENTERING INFORMATION INTO SOLOMON’S DATABASE Double-click on any table to begin entering information

  23. Entering Information We double-clicked on the Supplier table and can now begin entering information We have completed entering all supplier information

  24. Referential Integrity • Referential integrity ensures consistency. For example, that you don’t put a non-existent Supplier ID into the Raw Material relation • The relationships we set up for referential integrity guard against bad information • Integrity constraints – rules that help ensure the quality of the information

  25. Enforcing Referential Integrity Because we entered a non-existent Supplier ID (445) that doesn’t exist, Access will not allow us to continue If you try to close the window, Access will allow you to change the information or save the good information without the bad

  26. Change the Structure of a Relation You can change the structure of a relation by clicking on View and then DesignView In Design View, you can change the structure of a table

  27. CREATING A SIMPLE QUERY USING ONE RELATION • Query-by-example (QBE) tool - helps you graphically design the answer to a question • Suppose we wanted to see a list of raw materials that shows • Raw Material Name • Supplier ID

  28. Creating a Simple Query Using the Raw Material Relation First, click on Create and then Query Design Second, select the table, click on Add, and then close the box.

  29. Creating a Simple Query Using the Raw Material Relation The result of the query Drag and drop the appropriate field names and then click on the exclamation point (Run).

  30. Creating a Simple Query with a Condition Set the condition here

  31. CREATING AN ADVANCED QUERY USING MORE THAN ONE RELATION • Suppose we want a query that shows • All order numbers • Date of orders • Where the goods were delivered • The contact person • The truck involved in each delivery • The truck driver in each delivery

  32. Steps to Create an Advanced Query • Click on Create in the menu area and then Query Design • In the Show Table dialog box • Select and Add the relation names • Close the Show Table dialog box • Tables linked appear are joined by lines with • 1 beside the table with the primary key • The infinity sign by the table with the foreign key

  33. Steps to Create an Advanced Query • Drag and drop the fields that you want from the appropriate relation into the QBE grid in the order that you want • Click on the exclamation point (Run) in the button bar to see the results of the query

  34. Steps to Create an Advanced Query From the Show Table box, select the appropriate tables – Customer, Order, Employee and Truck

  35. Steps to Create an Advanced Query Drag and drop the appropriate fields

  36. Steps to Create an Advanced Query The completed query

  37. GENERATING A SIMPLE REPORT • Click on Create in the menu area and then the Report Wizard button • Choose tables and/or queries: Lets you choose which table/query you want • Choose fields: Lets you choose the fields you want

  38. Grouping, Sorting, Layout of Report • Grouping: Lets you specify grouping of information (we chose the default) • Sorting: Allows you to specify sorting (we chose the default) • Layout and orientation: Allows you to select layout and page orientation (we chose the default)

  39. Style and Header of Report • Report header: Allows us to enter a title for the report. • The Report: Shows all customers and phone numbers.

  40. Choose Table/Query and Fields Choose tables and/or queries Click on Create and then Report Wizard

  41. Choose Table/Query and Fields We don’t need grouping so click on Next. Select fields by clicking on each and clicking on the > Then click on Next 4. Grouping

  42. Sorting and Layout Select a Layout and Orientation We don’t need to sort so click on Next.

  43. Style and Title The wizard generated completed report Choose a Style then click on Next. Enter a report headerand click on Finish

  44. Changing the Look of the Report Click on View an choose Layout View Click on Close Print Preview

  45. Changing the Look of a Report Move the report elements to change the look of the report

  46. REPORT WITH GROUPING, SORTING, AND TOTALS • Say we want to create the Supply Chain Management report from Extended Learning Module C • First, create a query • Then, put the query into the report generator

  47. Steps for Creating a Report with Grouping, Sorting, and Totals • Click on Create in the menu area and click on the Report Wizard button • Choose tables/queries: Query: Supply Chain Query • Choose fields: Select all fields by clicking on the double greater-than sign (>>)

  48. Specify Table/Query Fields Select all the fields of the Supply Chain query Select the Supply Chain query

  49. Grouping and Sorting Information • Top-level grouping: Allows you to choose ordering. Since we created a query, Access has defaulted to the first field • Further grouping: Lets you specify groups within the top grouping of Concrete Type, but we don’t want any further grouping • Sorting: Next we have a chance to sort our information

  50. Steps for Grouping Information Group by Concrete Type and Type Description and then click Next.

More Related