1 / 12

The Mariners Load Releasing Hitch

The Mariners Load Releasing Hitch. Required Materials: Two Large Carabiners One 60” Rescue Runner One Dissimilar Carabiner. Clip one end of the rescue runner into a large carabiner. Run the opposite end through the second carabiner. Continue back through the first carabiner.

amena-hunt
Download Presentation

The Mariners Load Releasing Hitch

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Mariners Load Releasing Hitch

  2. Required Materials: • Two Large Carabiners • One 60” Rescue Runner • One Dissimilar Carabiner

  3. Clip one end of the rescue runner into a large carabiner

  4. Run the opposite end through the second carabiner

  5. Continue back through the first carabiner

  6. Pull carabiners 8”-10” apart and begin to wrap the rescue runner around the two parallel strands

  7. Wrap around the parallel strands a minimum of four times

  8. Pass the end of the rescue runner between the two strands near the second carabiner

  9. Attach the dissimilar carabiner to the end of the rescue runner

  10. Attach the dissimilar carabiner to the second carabiner

  11. To transfer a load - Start by unclipping the dissimilar carabiner & re-clipping it around the parallel strands.

  12. Slowly unwind the wraps which transfers the load

More Related