1 / 18

HPPS long ring options

HPPS long ring options. HPPS long V1. QH1. QH3. QH4. QH2. NMC cell without the middle dipole and QH3 splitted μ x =0.8 (still for a resonant arc with 5 NMC cells) Reduced filling factor

alva
Download Presentation

HPPS long ring options

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HPPS long ring options

  2. HPPS long V1 QH1 QH3 QH4 QH2 • NMC cell without the middle dipole and QH3 splitted • μx=0.8 (still for a resonant arc with 5 NMC cells) • Reduced filling factor • Long straight section: μx=0.44, μy=0.56  slightly larger than previous version (is this enough for the collimation system?)

  3. Circ.: 1256.3 γt=-14.7 Max quad pole tip: 1.7 T @ 50 GeV @ QH3 Dipole gapy=119 mm Ring params

  4. Working point • (Qx,Qy)=(13.32,7.27) • No crossing of the integer (better than in the case of the previous WP) • FM of the previous lattice showed that the (2, -2) not a limitation  needs to be confirmed • Difficult to tune in larger Qx without changing the arc μx • In any case in a more uniform distribution the nectai less wide • SC tune shift up to 4.5 σx,y • DA, FM and tunability studies needed

  5. Space charge • εx=11.9 μm-rad • εy=14.78 μm-rad

  6. Magnet parameters @ 50 GeV V1.1 Dipoles: gap_x=158.6 mm gap_y=118.7 mm

  7. HPPS long V2 • NMC cell without the middle dipole • μx=0.8 (still for a resonant arc with 5 NMC cells) • Reduced filling factor • Long straight section: μx=0.47, μy=0.5  is this enough for the collimation system?

  8. Circ.: 1256.3 γt=-13.2 Max quad pole tip: 1.16 T @ 50 GeV @ QH4 Dipole gapy=114 mm Large betas Ring optics and WP v2.1

  9. Circ.: 1256.3 γt=-13.7 Max quad pole tip: 1.16 T @ 50 GeV @ QH4 Dipole gapy=123.7 mm Larger betas Ring optics and WP v2.2

  10. Working point • V2.1 • (Qx,Qy)=(13.41,9.6) • SC tune shift up to 4.5 σx,y • DA, FM and tunability studies needed • V2.2 • (Qx,Qy)=(13.23,9.23) • SC tune shift up to 4.5 σx,y

  11. Space charge • εx=13.4 μm-rad • εy=13.45 μm-rad

  12. Magnet parameters v21 Dipoles: gap_x=128.1 mm gap_y=105.1 mm v22 Dipoles: gap_x=115.58 gap_y=114.45 mm

  13. Circ.: 1256.3 γt=-26.1 Max quad pole tip: 1.19 T @ 50 GeV @ QH3 Dipole gapx=128 mm Dipole gapy=105 mm Ring optics v2.3

  14. Ring optics v2.3

  15. Working point V23 • V2.3 • (Qx,Qy)=(13.875,12.31) • SC tune shift up to 4.5 σx,y

  16. Space charge & emittance V23 • εx=13.4 μm-rad • εy=13.45 μm-rad

  17. Magnet parameters 50 GeV Dipoles: gap_x=127.9 mm gap_y=104.9 mm 75 GeV Dipoles: gap_x=118.7 mm gap_y=88.3 mm

More Related