1 / 23

Job Submission

Job Submission. Job submission. Basic procedure Create a block Allocate a block Boot a block Run a job Free the block, or run another job. Block creation. Two ways of creating blocks Block builder mmcs_db_console The use of block builder is recommended

alika
Download Presentation

Job Submission

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Job Submission

  2. Job submission • Basic procedure • Create a block • Allocate a block • Boot a block • Run a job • Free the block, or run another job

  3. Block creation • Two ways of creating blocks • Block builder • mmcs_db_console • The use of block builder is recommended • Block builder is capable to create any available blocks • Block builder is a lot easier to use…

  4. Block creation • Block builder • Available via Navigator • Able to create any block with a valid block size • 16, 32, 64, 128 and 256 nodes (mesh) • 512 and multiples of 512 nodes (torus/mesh) • Starting card • 16 node : J00, J01 • 64 node : N00, N02, N04, N08, N10, N12 or N14 • 128 node : N00, N04, N08 or N12 • 256 node : N00 or N08

  5. Block creation • mmcs_db_console • Able to create most of the available blocks • Provides a set of commands to create block • genblock : a base partition • genblocks : each base partition on the system • gensmallblock : a sub-base partition • genBPblock : a set of base partitions • genfullblock : the entire system • Use Navigator for pass-through or split cables

  6. Block deletion • Available via mmcs_db_console • mmcs$ delete bgpblock R00-M0 type ‘help delete’ in the mmcs shell prompt for usage • Block deletion is not available via Navigator’s GUI • mmcs_db_console within the Navigator is available

  7. Exercise • Create a block from the block builder • Create a block from the mmcs_db_console • Delete a block from the mmcs_db_console

  8. Job modes • There are three job modes, virtual node mode, SMP mode, and Dual Mode • MPI Ranks (processes) per node & Threads per process: • VNM 4 processes/node, 1 thread/process • SMP 1 process/node, 4 threads/process • Dual 2 processes/node, 2 threads/process Virtual Node Mode SMP Mode Dual Mode CPU 0 Rank 0 CPU 1 Rank 1 CPU 0 Rank 0 CPU 1 thread CPU 0 Rank 0 CPU 1 thread CPU 2 Rank 2 CPU 3 Rank 3 CPU 2 thread CPU 3 thread CPU 2 Rank 1 CPU 3 thread

  9. Job submission • Ways to submit a job • mmcs_db_console • mpirun • LoadLeveler

  10. Job submission • mmcs_db_console • A console for the Midplane Management Control System (MMCS) • Used to configure and allocate blocks of compute nodes and I/O nodes and run programs on the BG/P system. • Basically for administrator use • Requires an access to the service node • Environmental variable needed to be set • /etc/profile.d/bgp.sh • Caveat when submitting jobs from the console • No stdin support • stdout & stderr sent to files

  11. Job submission • mmcs_db_console • $ cd /bgsys/driver/ppcfloor/bin • $ ./mmcs_db_console • mmcs$ allocate_block R00-M0 • mmcs$ boot_block • mmcs$ submit_job /bghome/test/hello.rts /bghome/test • mmcs$ free R00-M0 • mmcs$ quit type ‘help’ in the mmcs shell prompt for available commands

  12. Job submission • mmcs commands • allocate_block : mark the block as allocated, but does not boot it • boot_block : initialize, load and start block resource • submit_job : starts an executable running on the currently selected block • free : release the resources associated with the block ID

  13. Job submission • mpirun • Launches jobs on the BG/P hardware and acts as a job monitor • mpirun continually monitors status of the job, terminates when job is done • Transparently forwards stdin & receives stdout and stderr • Acts as a gateway for debuggers such as gdb and TotalView • Each job requires a partition • Can be allocated on the fly (-np or –shape) • Or used predefined partitions • Can boot partitions from their initial state • Disable this feature with –noallocate • User should verify no overlapping busy hardware • Can optionally not destroy booted partitions with -nofree

  14. Job submission • mpirun $ mpirun –partition R00-M0 –mode SMP –cwd /bghome/test –exe /bghome/test/hello.rts partition : specify which block to use mode : specify execution processor mode cwd : specify currently working directory exe : specify the program to run type mpirun –h for available options

  15. Job submission • LoadLeveler • Allocates machine resources to run jobs • Scheduling of jobs depends on the availability of resources within the system • A user submits a job using a job command file • Maximize the efficiency of the cluster by maximizing the utilization of resources

  16. Job submission • LoadLeveler some of the tasks can be performed: • Choosing the next job to run • Examining the job requirements • Collecting available resource in its cluster • Dispatching the job to the selected machine • Controlling running jobs • Create reservations and schedule jobs to run in the reservations • Job preemption to enable high priority jobs to run immediately • Fair share scheduling to automatically balance resources among users or groups of users • Co-scheduling to enable several jobs to be scheduled to run at the same time

  17. Example code • 1. Write simple hello world: /* Hello World program */ #include<stdio.h> void main(void) { printf("Hello World!\n"); } • 2. Compile the program: /bgsys/drivers/ppcfloor/comm/bin/mpicc -o hello hello.c • 3. Run the program: Assuming that the program lives in /bgsys/apps and you want the results (STDOUT and STDERR) to be written to /bgsys/apps/results: At the mmcs_db_console prompt: mmcs$ submit_job /bgsys/apps/hello /bgsys/apps/results/

  18. Exercise • Submit a job using mmcs_db_console • Free the block after the job finishes • Submit a job using mpirun • Submit a job using LoadLeveler

  19. Job termination • mmcs_db_console • killjob, kill_job • mmcs$ killjob R00-M0 124 • mmcs$ wait_job • Terminating a job can take a while • default timeout is 5 minutes

  20. Job termination • mpirun Control-C • mpirund will do a cleanup • Do not send multiple control-C • Second control-C will force termination • Third control-C is almost similar to kill -9, which may cause block state to be left in limbo

  21. Scripting A list of commands for mmcs_db_console can be written into a file for a scripting usage $ mmcs_db_console < script_file script_file is a simple ascii text file with a list of commands for mmcs_db_console

  22. Scripting • Sample script_file Create and test several blocks $ cat script_file genblock R00-M0 R00-M0 64 allocate R00-M0 free R00-M0 genblock R00-M1 R00-M1 64 allocate R00-M1 free R00-M1 … quit

  23. Bridge API • Public API used by job schedulers • LoadLeveler, SLURM, Altair PBS Pro, Platform LSF, Cobalt • Used by mpirun too • Has Interfaces to manage various Blue Gene resources • Create, destroy, query logical constructs such as jobs and partitions • Query physical entities such as midplanes, node cards, switches, and cables • Essentially a thin abstraction layer of the database • Requires a polling model to obtain machine state, example: • Grab a snapshot of the machine state • Create a partition based on free resources • Boot partition • Poll partition state until it is INITIALIZED

More Related