1 / 22

High-Resolution Effective K Measurements Using Spontaneous Undulator Radiation

High-Resolution Effective K Measurements Using Spontaneous Undulator Radiation. Bingxin Yang Advanced Photon Source Argonne National Lab. Two Essential Elements for Far-Field Measurements. (Adapted from x-ray diagnostics planning meeting, Feb. 2004, SLAC) Roll away undulators

alessa
Download Presentation

High-Resolution Effective K Measurements Using Spontaneous Undulator Radiation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. High-Resolution Effective K MeasurementsUsing Spontaneous Undulator Radiation Bingxin Yang Advanced Photon Source Argonne National Lab

  2. Two Essential Elements for Far-Field Measurements (Adapted from x-ray diagnostics planning meeting, Feb. 2004, SLAC) • Roll away undulators Spontaneous radiation is most useful when background is clean, with each undulator rolled in individually. • Adequate Far-field X-ray Diagnostics extracts the beam / undulator information • Electron trajectory inside the undulator (mm / mrad accuracy) • Undulator K-value (DK/K ~ 1.5 × 10-4) • Relative phase of undulators (Df ~ 10°) • X-ray intensity measurements (DE/E ~ 0.1%, z-dependent) • Micro-bunching measurements (z-dependent)

  3. Scope Relative measurements of undulator effective K using far-field spontaneous radiation (8 keV, 40 m to 60 m from undulator exit). Bonus: Wide bandwidth monochromator for z-dependent x-ray intensity measurement (DE/E ~ 0.1%). • Introduction: A simple feature of the spontaneous spectrum • Effect of beam quality: emittance, energy spread… • Simulated experiments (DK/K ~ 10-6?!) • Key components • Final remarks (conditional conclusion) Contents

  4. Main Tools • Analytical work (back of an envelope) • Numerical simulations (MathCAD) • Undulator Radiation Modeling (XOP) • Angle integrated spectra: XOP/XUS • Undulator radiation intensity profile: XOP/XURGENT • Reference: M. Sanchez del Rio and R. J. Dejus "XOP: Recent Developments," SPIE proceedings Vol. 3448, pp.340-345, 1998.

  5. Spontaneous Radiation Spectrum

  6. A Closer Look at the Spectral Edge • Monitor the edge of angle-integrated spectrum • Shifts DE/E ~ – 2DK/K. • 50 – 100 data points, 5 – 15 minutes to acquire a spectrum! • Monitor the intensity at fundamental photon energy • Change DF/F ~ 400 DK/K  < 6% intensity change needed • Takes 1 – 2 seconds to acquire data?

  7. Impact of Aperture Change (Size and Center) • Lower energy photons come in larger angles. • Spectra independent ofaperture size / location as long as the beam is fully contained. • Spectra independent of emittance for adequate aperture.

  8. Impact of Finite Energy Resolution • Electron beam energy spread (0.06% RMS) • X-ray energy spread = 25 eV FWHM • Monochromator resolution (DE/E ~ 0.1% or 8 eV) Small effect on 70-eV wide edge!

  9. Impact of Electron Bunch Charge Fluctuation Impact of Electron Energy Jitter • X-ray intensity is proportional to electron bunch charge. Current monitor data (20% fluctuation) can be used to normalize the x-ray intensity data. • Location of the spectrum edge is very sensitive to e-beam energy change (0.1% jitter): Dw/w = 2·Dg/g Most damaging instrument effect!

  10. A Simulation: Input and Approach

  11. A look at the output intensity jitter Intensity distribution depends strongly on photon energy!

  12. Effect of multi-shots integration An acceptable spectrum needs integration of 256 – 1024 shots, resulting scan time = 7 – 18 minutes @ 120 Hz.

  13. Summary of One-Undulator Simulations • Intensity noise (jitter) at the spectrum edge is largely due to electron beam energy jitter. • With sufficient integration time, the measured spectrum is accurate enough to resolve effective K change at a level of DK/K ~ 1.5 × 10-4. • Average will take longer if LINAC jitter has time structure. • A faster and more accurate technique is desirable.

  14. Electricity 101 • DV/V ~ 0.001, DI/I ~ 0.001, R = 3.50xxx? • Compare two passive devices: (R-R0)/R ~ I

  15. Differential Measurements of Two Undulators • Insert only two segments in for the entire undulator. • Kick the e-beam to separate the x-rays Use one mono to pick the same x-ray energy Use two detectors to detect the x-ray flux separately Use differential electronics to get the difference in flux

  16. Differential Measurements: Signal • Select x-ray energy at the edge (Point A). • Record difference in flux from two undulators. • Make histogram to analyze signal quality • Signals are statistically significant when peaks are distinctly resolved DK/K =  1.5  10-4

  17. Summing multi-shots improves resolution • Summing difference signals over 64 bunches (0.5 sec.) • Distinct peaks make it possible to calculate the difference DK at the level of 10-5. Example: Average improves resolution for DK/K =  10-5

  18. Simulation II Recap • Use one perfect reference undulator to test another perfect undulator (two Perfect Periodic Undulators) • Set monochromator energy at the spectral edge • Accumulate difference count from the two undulators for ~64 bunches (0.5 second). The signal is statistically significant in resolving undulators with DK/K =  3  10-6 Is it still meaningful? Can we detect minor radiation damage?

  19. Key Component: Reference Undulator • Last segment in the undulator • Period length and B-field same as other segments • Zero cant angle • Field characterized with high accuracy • Upstream corrector capable of 400 mrad kicks.

  20. Key Component: Monochromator • Large acceptance aperture (30 mm  15 mm) • Wide bandwidth (DE/E = 0.1%) • Asymmetrically cut Ge(111) crystals (2 – 8 keV) • Multilayer reflectors (0.8 – 2.5 keV) • Low power only • Large dynamic range detector(s) • Low noise amplifier and 16-bit digitizers

  21. Asymmetrically Cut Ge(111)

  22. Final Remarks • We proposed a differential measurement technique for effective K. It is based on comparison of angle-integrated flux intensity from a test undulator with that from a reference undulator. • Within the perfect undulator approximation, its potential resolution, DK/K =  3  10-6 or better, is sufficient for LCLS applications. • It is essential to have remotely controlled roll away undulators for this technique to be practical. • For not so perfect undulators, we need to extend the definition of Keff, or define a new figure of merit. The limitation of this proposed technique will need to be re-examined in that context.

More Related