1 / 33

Response Checks of Portable Radiation Detection Instruments

Response Checks of Portable Radiation Detection Instruments. HPT 001.306. Enabling Objectives. Name Instrument Control Procedure State Calibration Organization State Frequency of Response Checks Identify Response Check Equipment Identify Shepherd Components. Enabling Objectives.

alcina
Download Presentation

Response Checks of Portable Radiation Detection Instruments

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Response Checks of PortableRadiation Detection Instruments HPT 001.306

  2. Enabling Objectives • Name Instrument Control Procedure • State Calibration Organization • State Frequency of Response Checks • Identify Response Check Equipment • Identify Shepherd Components

  3. Enabling Objectives • State Isotopes & Activity for Shepherd Sources • Identify Response Window Criteria • Identify Instruments Response Checked with Plutonium • State Purpose of Scintrex Model 309A

  4. Instrumentation Controls • TVAN RCDP-8, “Radiological Instrument/ Equipment Controls”

  5. Instrument Calibration • Portable Radiation Detection Instruments Calibrated by:Environmental RadiologicalMonitoring & Instrumentation (ERM&I)Western Area Radiological Laboratory,(WARL) Muscle Shoals, AL

  6. Response Check Frequency • Teletector & RSO-7 Daily • Beta-Gamma Instruments Weekly • Alpha & Beta Friskers Weekly • Neutron Dose Instruments Weekly • On-Site REP Instruments Weekly • Electronic Dosimeters Quarterly

  7. Response Checks ofBeta-Gamma Dose Instruments • Shepherd Model 89 Irradiator- Source Rod Assembly- Shielded Calibration Range Assembly- Attenuator Assembly- Table Assembly

  8. Shepherd Source Rod AssemblyCs-137130 mCi 400 Ci

  9. Shepherd Shielded Calibration Range Assembly

  10. Shepherd Attenuator Assembly

  11. Shepherd Table Assembly

  12. Shepherd Precautions • Plugs in Unused Access Ports • Hands & Fingers Clear of Door • Never Lubricate Source Rod • Don’t Twist Attenuator Handles • Move Table Slowly • Utilize Survey Meter

  13. Shepherd Performance Checks • Test the Interlock System- Attempt to Raise Source or Open Door with Power Off- Attempt to Raise Source with Door Open- Attempt to Open Door with Source Raised

  14. Establishing Response Windows • Expose at Least Four Instruments • Exposure Values Near Midscale • Set Window for Each Scale

  15. Response Window Criteria • Arithmetic Mean of all Instruments • Calculate Highest Percent Difference • Calculate Lowest Percent Difference • Discard Highest or Lowest Percent Difference if Exceed 10 Percent • Response Window = Mean ± 20 % • Expressed as Range

  16. Instrument Pre-Operational Checks • Inspect for Damage • Inspect Switches, Alarms, Controls • Inspect Cables & Power Cords • Check Battery Strength • Instrument in Calibration

  17. Performing Response Checks with Shepherd Irradiator • Position Instrument on Guide- Beta Gamma Survey Meter- Teletector- Electronic Dosimeter

  18. Beta-Gamma Survey Meter

  19. Teletector

  20. Electronic Dosimeter

  21. Performing Response Checks with Shepherd Irradiator • Position Attenuators and Platform • Close Door • Raise Source to make Exposure • Lower Source to “Off” • Repeat for Each Scale • Document Results

  22. Observation Window

  23. Response Check of AlphaSurvey Instruments • Alpha Sources, ie Pu-239 • Inspect Mylar Windows • Perform Light Test • Expose Detector • Compare Results with Response Log • Check Each Scale or Decade • Document Results

  24. Alpha Survey Instrument

  25. Neutron Survey Instrument

  26. Response Check ofNeutron Instruments • Set up the Instrument Scale • Instrument Over Neutron Source • Check Other Scales/Decades withPulse Generator • Compare Results with Response Log • Document Results

  27. Frisker

  28. Response Check ofFriskers • Sources Identified in Response Log • Set Frisker to Appropriate Range/Scale • Position Probe over Source • Repeat for Other Scales • Compare Results with Response Log • Document Results

  29. Tritium in Air Monitor

  30. Response Check ofScintrex Model 309A • Inspect Filter Paper • Ensure Battery >3.0 volts • Set Function Switch to ‘Display On’ • Press ‘Test’ Button • Observe Display < 50

  31. Response Check ofScintrex Model 309A • Position Gamma Source on Right Side • Wait 1-2 Minutes • Observe Reading Between 8 & 24 • Depress ‘Test’ Button • Document Results

  32. Summary • Instrument Calibration Critical • Response Checks Confirm Operation • Shepherd Model 89 Irradiator • Other Response Checks:- Alpha Survey Instruments- Neutron Instruments- Friskers- Tritium-in-Air

  33. Prevent Errors -Reduce Contamination

More Related