1 / 33

National Report on Nuclear Power Plant IC in the Republic of Korea

2. << Contents >>. NPP Overview I

albert
Download Presentation

National Report on Nuclear Power Plant IC in the Republic of Korea

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. IAEA TWG-NPPCI MEETING May. 23 - 25, 2005, Vienna by Hang Bae Kim KOREA POWER ENGINEERING COMPANY, INC. National Report on Nuclear Power Plant I&C in the Republic of Korea

    2. 2

    3. 3 NPP Overview(1) Nuclear Power Plants

    4. 4 NPP Overview(2)

    5. 5 NPP Overview(3)

    6. 6 NPP Overview(4) Projection of Electricity Generation

    7. 7 I&C Overview (1) I&C Programs (2003-2005) New Construction APR1400 MMIS (Shin-Kori 3&4) Core Protection System for OPR1000+ Research and Development KNICS (Korea Nuclear I&C System) Automatic Spec. and Code Generation Ultrasonic Flow Meter Upgrade I&C Upgrade Strategic Plan

    8. 8 I&C Overview(2) 1st Generation: use of relay technology Implemented by various relays Kori unit 1: Reactor Protection Systems (RPS), etc. 1st upgraded with digital modules in Korea(1998) 2nd Generation: use of solid-state technology Implemented by analog Integrated Circuit (IC) chips Kori 2,3&4, Yonggwang 1&2, Ulchin 1&2: RPS, ESFAS, etc. 3rd Generation: use of hybrid technologies Implemented by microprocessor-based and relay components Wolsong 1,2,3&4, Yonggwang 3,4,5&6, Ulchin 3&4: RPS, ESFAS, PCS, etc.

    9. 9 I&C Overview(3) 4th Generation: use of PLC-based computer technologies Implemented by digital PLC-based computers and software systems Ulchin 5&6, Shin Kori 1&2, Shin Wolsong 1&2: DPPS, DESFAS-AC, data communications, etc. 5th Generation: use of advanced HMI technologies Implemented by digital computers and software systems Integrating advanced human-system interfaces into main control room and remote shutdown stations Shin Kori units 3&4(APR-1400): DPPS, ESF-CCS, MCR, Soft Controls, Graphic Display Systems, etc.

    10. 10 I&C Overview(4)

    11. 11 New Construction (APR1400 MMIS) (1)

    12. 12 New Construction (APR1400 MMIS) (2) Computer-based Advanced MCR Compact workstation Large Display Panel Safety Console Soft Control Fully Digitalized NSSS and BOP I&C Systems PLC for safety and DCS for non-safety I&C Systems Human Factors Engineering Verification & Validation Computerized Operating Procedures

    13. 13 New Construction (APR1400 MMIS) (3)

    14. 14 New Construction (APR1400 MMIS) (4) Block Diagram for APR1400 I&C Systems

    15. 15 New Construction (APR1400 MMIS) (5) Dynamic Mock up

    16. 16 New Construction (APR1400 MMIS) (6) Soft Control Template

    17. 17 Core Protection Calculator (CPC) Overview Safety system for DNBR, LPD trip Four independent channels CEA signals shared between CPC and CEAC using fiber optic isolation devices Problems Obsolete hardware Difficult maintenance of software Implemented with assembly language Single point of failures Two channels of CEAC (actuated by ˝ logic) Failure of signal Isolators (CEA input signals to CEAC) New Construction (OPR1000+ CPC) (1)

    18. 18 Hardware and Configuration PLC for safety function Color flat panel display for operator’s module Network for intra-channel communication Serial data communication for inter-channel data sharing Software Function block structure Customized function blocks for PLC using C language Independent verification and validation of software Preliminary software hazard analysis Requirement traceability matrix Code review Module, unit, system integration testing New Construction (OPR1000 + CPC) (2)

    19. 19 SYSTEM BLOCK DIAGRAM New Construction (OPR1000 + CPC) (3)

    20. 20 R&D (KNICS) (1)

    21. 21 R&D (KNICS) (2) Major Activities Development of digital systems and equipment Localization and licensing of safety-grade PLC and digital RPS and ESF–CCS Safety-grade software qualification Development of Control Rod Control System Localization for existing & next-generation NPPs Development of Distributed Control System Localization of hardware platform for monitoring and control systems for NPPs

    22. 22 R&D (KNICS) (3)

    23. 23 R&D (Software Tool) (1) Main Purpose Develop the methodology to generate the automated software design specification and source code for the nuclear I&C systems. Software Engineering Tools Integrated into the System Requirements management and traceability analysis tool Modeling and auto-code generation tool Object oriented compiler such as C++ and JAVA Code auto testing tool Configuration management tool

    24. 24 R&D (Software Tool) (2) Overall Scheme

    25. 25 R&D (Software Tool) (3) Prototype

    26. 26 R&D (UFM) (1) Background Utility concerned the power derating since 1998 Derating : 20 – 40 MWe Fouling was presumed as main cause Needs for alternative method to measure the feedwater flow Main Purpose Develop the technology for adopting UFM in feedwater flow measurement in Korea NPPs Measurement accuracy : < ą0.6% Prepare topical report Support licensing

    27. 27 R&D (UFM) (2) Activities Develop the technology for application of UFM in feedwater measurement Select UFM vendor Perform performance and reliability tests Measure feedwater flow in operating plants and verify applicability of UFM Verifying actual measurement uncertainty Perform analyses Effects of application of flow correction factor Calculations of uncertainty of reactor power Prepare topical report for UFM application

    28. 28 R&D (UFM) (3) Flow Measurement Using UFM

    29. 29 I&C Upgrade (Plan) (1) Objective

    30. 30 I&C Upgrade (Plan) (2) Overall Flow

    31. 31 I&C Upgrade (Plan) (3) Process

    32. 32 Conclusion

    33. 33 Suggestions

More Related