1 / 18

Igneous and metamorphic petrology

Igneous and metamorphic petrology. Fundamentals Classification Thermodynamics and kinetics Igneous Silicate melts and fluids Crystal melt equilibria Chemical dynamics of melts and crystals Magma ascent, emplacement and eruption Generation of magma and differentiation

alaura
Download Presentation

Igneous and metamorphic petrology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Igneous and metamorphic petrology Fundamentals Classification Thermodynamics and kinetics Igneous Silicate melts and fluids Crystal melt equilibria Chemical dynamics of melts and crystals Magma ascent, emplacement and eruption Generation of magma and differentiation Magmatism and tectonics Metamorphic Fabric, composition and classification Mineral reactions and equilibria Processes and kinetics P-T-t paths, facies and zones Lecture part 60% Tests: 1st: Topic 1-3 (20%) 2nd: Topic 4-9 (20%) 3rd: Topic 10-13 (20%) Final: all Lab: 1. Identification of rocks Hand specimen and microscope 2. CIPW norm calculation 3. Thermodynamics problemset 4. Petrological databases 5. MELTS Lab part 40% Identification: igneous (15%), metamorphic (9%); exercises (16%)

  2. Magmatic rocks: Formed by cooling of magma (700-1200oC at the surface) Concentrated in regions in the Earth Both igneous and metamorphic processes require thermal energy Energy: capacity to do work (w), product of force (F) and displacement (d). W=Fd Work in geological systems related to pressure and volume (PV). Pressure: force over area P=F/area, volume V=area x d. PV=Fd=w. Kinetic energy: F=1/2 mv2 Potential energy: related to position. Gravitational potential energy: E=mgz Thermal energy: internal, transferred as heat

  3. Energy transfer and heat Thermal energy and work (PV) are convertible and transformation is conservative No loss of energy or mass: first law of thermodynamics Heat flow: quantity of heat (q) transferred to a body results in a rise in temperature (T): q=cpT. cp is heat capacity (J/molK). Heat can be transferred through: Radiation Advection Conduction Convection Cool rocks are opaque Radiation insignificant for Earth’s heat budget, because…… Advection, where? Conduction: transfer of kinetic energy by vibrating atoms. No conduction in perfect vacuum. Difference in T between two locations: thermal gradient Rate at which heat is conducted from a unit surface area: heat flux or heat flow heatflow= thermal conductivity x thermal gradient Geothermal gradient or geotherm T/z Fluid flow through rocks, cracks. Hydrothermal systems

  4. Geotherm and convection At the surface thermal gradient is 20K/km. Convecting mantle results in a less steep geotherm with depth Three pieces of evidence for convection and the existence of a viscous mantle: 1. Mid-ocean ridge volcanism 2. Subducting slabs 3. Mantle plumes Viscosity: measure of resistance to flow Mantle is 1018 times more viscous than tar There is a pressure dependence on the viscosity

  5. Igneous activity has petrotectonic association: Certain rocktypes are found together. Energy sources: Accretion Core formation Radioactive decay Inner core growth Pressure: Geobaric gradient P/z 1bar=105 Pa=0.9896 atm, 1000bar = 1 kbar=0.1 GPa. Lithostatic load is confining pressure P=F/A=mg/A, m is mass and g is acceleration of gravity or P/z= g, where  is density Rock forming processes: Changes in states of a system. System is user defined. State of the system: conditions that define its properties or energy. Equilibrium, stable-metastable

  6. Rock properties • Composition • -Chemical • -Mineralogical • -Modal • Field relation • Fabric

  7. What does petrology want to answer • When and how did a particular magma originate • How was the magma transported from dource to emplacement • What physical, chemical and thermal processes operated on the system during crystallization • What was the nature of the rock prior to metamorphism and its history of deformation and recrystallization • How do petrologic processes control evolution of the crust and relate to global tectonics • How can the modern petrotectonic associations by used to infer tectonic regimes in ancient rocks • How did the planet originate and evolve • What is the effect of petrological processes on society and life

  8. Composition and classification • Analytical procedures: • Sampling controlled by factors like: grainsize, alteration, weathering • Accuracy and precision. • Precision: how well can you reproduce the number • Accuracy: how close to the “true value. • -Modal analysis often done by point counting -Chemical analyses Major elements content reported in wt% Trace element content in ppm or ppb Instruments: XRF, ICP, electron probe Volatiles are driven off: Loss On Ignition

  9. Mineral composition Mineral association: There are a limited number of combinations: For example: quartz and magnesian olivine do do co-exist Other examples: leucite and orthopyroxene

  10. Major minerals and their composition Major mineral Simple formula Compatible trace elements Olivine (Mg,Fe)2SiO4 Ni, Cr, Co Orthopyroxene (Mg,Fe)2Si2O6 Ni, Cr, Co Clinopyroxene Ca(Mg,Fe)(Si,Al)2O6 Cr, Sc Hornblende (Ca,Na)2-3(Mg,Fe,Al)5 Ni,Cr,Co,Sc (Si,Al)8O22(OH,F)2 Biotite K2(Mg,Fe,Al,Ti)6 Ni,Cr,Co,Sc,Ba,Rb (Si,Al)8O20(OH,F)4 Muscovite K2Al4(Si,Al)8O20(OH,F)4 Rb,Ba Plagioclase (Na,Ca)(Si,Al)4O8 Sr,Eu K-feldspar KAlSi3O8 Accessory minerals Magnetite Fe3O4 V,Sc Ilmenite FeTiO3 V,Sc Sulfides Cu,Au,Ag,Ni,PGE Zircon ZrSiO4 Hf,U,Th, heavy REE Apatite Ca5(PO4)3(OH,F,Cl) U, middle REE Allanite Ca2(Fe,Ti,Al)3(O,OH) Light REE, Y, Th, U (Si2O7)(SiO4) Xenotime YPO4 Heavy REE Monazite (Ce,La,Th)POY, light REE Titanite (Sphene) CaTiSiO5 U,Th,Nb,Ta, middle REE

  11. Chemical composition Cartesian or triangular variation diagrams Diagrams are designed to highlight process,

  12. Chemical composition II Modal composition Sierra Nevada batholith

  13. Classification based on fabric Phaneritic: contains grains large enough to identify by eye Aphanitic: grains are too small to be identified by eye Porphyritic: Large grain size (phenocysts) and small grain size (matric) Aphyric: contains no crystals Sparsely phyric: contains less then 5% crystals Phyric: contain more then 5% crystals Holocrystalline: made entirely of crystals Felsic: contains large amount of feldspars Mafic: Fe-rich Ultramafic: Fe and Mg-rich Granite Aplite Pegmatite

  14. Mafic and ultramafic

  15. Apanitic and Glassy Rocks

  16. CIPW Normative composition Hypothetical mineral assembledge based on the whole rock composition Molecular ratio of Fe2O3/FeO=0.15 Calculate molar proportions of the oxides Add MnO and NiO to FeO Add SrO and BaO to CaO Normative apatite, Ap, allocate CaO equal to 3.3 times P2O5 Il, allocate FeO equal to the proportion f TiO2 If there is excess TiO2 allocate amount of CaO equal to the excess TiO2 to make titanite, but only after An allocation If there is still excess TiO2 allocate it to rutile Allocate Al2O3 for Or If there is excess K2O make Ks, peralkaline Allocate excess Al2O3 to make provisional Ab, If there is excess Na2O allocate Fe2O3 to make Ac.

  17. CIPW Normative composition cont’d 13. If there is excess Na2O make Ns. 14. If there is excess Al2O3 make An 15. If there is excess Al2O3 make C. 16. Allocate equal amount of FeO to Fe2O3 to make Mt. 17. If there is excess Fe2O3 make Hm. 18. Calculate FeO/MgO ratio. 19. Allocate (FeO+MgO) equal to CaO with FeO/MgO ratio to Di. 20. If there is excess CaO allocate it to Wo. 21. If there is excess (FeO+MgO) make Hy. 22. Assign SiO2 to the normative minerals. 23. If there is excess SiO2 make Qz. 24. If there is a deficit of SiO2 an additional 10 steps

  18. CIPW Normative composition cont’d Why? Silica saturation (Mg,Fe)2SiO4 + SiO2 = 2(Mg,Fe)SiO3 and NaAlSiO4 + 2SiO2 = NaAlSi3O8 Modest silica deficiencies are shown by normative Ol, while strong undersaturation is shown by normative Ne and Lc. Silica oversaturated: Qz; silica saturated: Hy; silica undersaturated: Ol. Different saturation levels lead to different pathways during melting and crystallization. Alumina saturation:

More Related