1 / 10

S1G Spectrum Regulations Outside the US

S1G Spectrum Regulations Outside the US. Authors:. Date: 2011-05-09. Slide 1. Outline. S1G spectrum available in the US (26MHz) is much larger than other countries (and allows higher transmission power)

aida
Download Presentation

S1G Spectrum Regulations Outside the US

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. S1G Spectrum Regulations Outside the US Authors: Date: 2011-05-09 Ron Porat, Broadcom Slide 1

  2. Outline • S1G spectrum available in the US (26MHz) is much larger than other countries (and allows higher transmission power) • We present our current understanding of available spectrum and channelization outside the US Ron Porat, Broadcom Slide 2

  3. Korea • Frequency band: 917 ~ 923.5 MHz (6.5 MHz) • RFID and USN(Ubiquitous Sensor Network) share the band • Transmit signal center frequency Ron Porat, Broadcom Slide 3

  4. Cont. (1) • Max EIRP ≤ 10 mW except Ch#1,3,4,6,7,9,10,12,13,15,16,18 • Max EIRP ≤ 3 mW for Ch#1,3,4,6,7,9,10,12,13,15,16,18 • Channel bandwidth: no restriction • Occupied channel bandwidth within 917 ~ 923.5 MHz • High power RFID share the band • Ch#2,5,8,11,14,17: max EIRP ≤ 4W • Ch#20~32: max EIRP ≤ 200 mW 10 mW 3 mW Channel number: 1 3 4 6 7 9 10 12 13 15 16 18 32 19 917 MHz 923.4 MHz Ron Porat, Broadcom Slide 4

  5. Cont. (2) • Channel sharing • Frequency hopping (FH): • Number of hopping channels ≥ 16 • Dwell time in one channel ≤ 0.4 sec • Listen Before Transmission (LBT): • Minimum sensing time ≥ 5 msec • CCA threshold: -65 dBm • Maximum transmission on-time ≤ 4 sec • Minimum transmission off-time after transmission ≥ 50 msec • Techniques other than FH and LBT • Duty cycle ≤ 2% for 20 sec period of time Ron Porat, Broadcom Slide 5

  6. China • Information from the Office of State Radio Regulatory Commission of the People’s Republic of China (SRRC) website [2] • For 470~510 MHz and 779~787 MHz bands: • Wireless microphone and civilian radio and other types of equipment, measuring instruments • Frequency :470-510MHz ,630-787MHz  • Transmission power limit: 50mW (erp)  • Occupied bandwidth: less than 200kHz • Frequency tolerance: 100 × 10 -6 • All kinds of consumer devices in the wireless control device  • Not be used for wireless control toys, model.  • Frequency :779-787MHz (8 MHz) • Transmission power limit: 10mW (erp)  Ron Porat, Broadcom Slide 6

  7. Japan • Based on [3], the current band is 950.8-957.6MHz (1mW max power or 10mW from 954MHz) • High power RFID (0.25W) share the band • Channelization is based on 200KHz element channels. Up to 1MHz signal BW allowed (5 channels). This is a recent increase from a maximum of 3 channels. • Mask for 1MHz channel operating at 10mW requires -39dBr 600KHz away from band edge (tighter than WiFi) • Based on discussions with author of [3], by the end of the year the spectrum will move to roughly 916-930MHz while still maintaining 1MHz limit. Ron Porat, Broadcom Slide 7

  8. Europe • Transmission in 863-870MHz band is allowed with up to 14dBm with PSD limit. • Unclear whether 868.6-870MHz needs to be avoided due to operation of alarms in this band. Ref [4] and [5] contradict each other. • High power RFID (2W) share the band 865-868MHz (hence allowing much higher PSD) • Duty cycle limitation of 2.8% for a given 200KHz (max 100sec transmission in 1 hour) • PSD limit is enforced in 3 different ways [4]: • Unclear whether larger than 0.6MHz channels with PSD>-0.8dBm/100KHz is allowed (while still maintaining total max power of 14dBm) Ron Porat, Broadcom Slide 8

  9. Conclusions • Channelization BW is quite limited outside the US and will most likely occupy the lowest end of our design. • About 7MHz is available throughout Europe, China, Japan and Korea with restrictions on channel BW. • 1MHz is the limit for Japan • Need to consider spectral masks requirements since they may be tighter than current 802.11 • Need to verify regulations before committing to specific designs Ron Porat, Broadcom Slide 9

  10. References [1] KCC Notice No. 2010-48 : Rules of Radio Equipment, Dec 17, 2010 [2] http://www.srrccn.org/srrc-approval-new2.htm [3] 15-10-0180-01-004g-current-status-of-japanese-regulatory-changes-regarding-950mhz-band.pdf [4] EN 300 220 [5] REC7003E.pdf Ron Porat, Broadcom Slide 10

More Related