1 / 27

VSA 訊號 量測基本步驟

VSA 訊號 量測基本步驟. 感知無線電通訊 系統與實驗 MBWCL. Baseband signal generator-1. 1. 選擇第一個方塊. 2. 進入此項調整參數. Baseband signal generator-2. 3. 選擇輸入訊號為隨機或是全 1 、全 0. Baseband signal generator-3. 4. 輸入訊號頻寬. 5 . 選擇調變方式. Baseband signal generator-4. 6. 將輸出打開. Baseband signal generator-5.

afia
Download Presentation

VSA 訊號 量測基本步驟

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. VSA訊號量測基本步驟 感知無線電通訊系統與實驗 MBWCL

  2. Baseband signal generator-1 1.選擇第一個方塊 2.進入此項調整參數

  3. Baseband signal generator-2 3.選擇輸入訊號為隨機或是全1、全0

  4. Baseband signal generator-3 4.輸入訊號頻寬 5.選擇調變方式

  5. Baseband signal generator-4 6.將輸出打開

  6. Baseband signal generator-5 注意: 在量測期間記得將輸出訊號level設定在相同伏特

  7. VSG(RF)-1 1.將訊號以及輸出打開

  8. VSG(RF)-2 2.調整輸出訊號的中心頻率

  9. VSG(RF)-3 3.調整輸出訊號的訊號強度

  10. VSA-1(開機畫面)

  11. VSA-2 1.利用滑鼠右鍵或是機台右方功能鍵選擇mode → 89601A VSA

  12. VSA-3 2. 將VSA啟動

  13. VSA-4 注意: 每次在做存檔的動作後或是在量測之前都要確定訊號來源正確

  14. VSA-5 3.設定量測頻率

  15. VSA-6 4.設定量測訊號中心頻率

  16. VSA-7 5.設定量測訊號頻寬

  17. VSA-8 6.設定計算參數

  18. VSA-9 7.將band power打勾 8.設定計算中心頻率 9.設定計算頻寬 10.計算結果

  19. VSA-10 11. 調整解析度

  20. VSA-11 12. 根據訊號大小調整(本次量測設為最低值-20dBm)

  21. VSA-12 本次量測2MHz的訊號能量 量測結果

  22. VSA-13 暫停波形

  23. VSA-14 紀錄波形

  24. VSA-15 紀錄完成後按close離開

  25. VSA-16 存檔

  26. VSA-17 注意: 存檔位置、檔案名稱與檔案格式

  27. VSA-18 將三個勾打勾儲存完整資訊

More Related