1 / 9

Anglicky v odborných předmětech "Support of teaching technical subjects in English “

Anglicky v odborných předmětech "Support of teaching technical subjects in English “. Tutorial : Mechanic - electrician Topic : Basics of electrical engineering the 2nd. y ear M easuring the capacity Prepared by: Ing. Jiří Smílek.

adrina
Download Presentation

Anglicky v odborných předmětech "Support of teaching technical subjects in English “

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Anglicky v odborných předmětech"Support ofteachingtechnicalsubjects in English“ Tutorial: Mechanic - electrician Topic: Basicsofelectricalengineering the 2nd. year Measuringthecapacity Prepared by: Ing. Jiří Smílek Projekt Anglicky v odborných předmětech, CZ.1.07/1.3.09/04.0002 je spolufinancován Evropským sociálním fondem a státním rozpočtem České republiky.

  2. Measuring capacity • The basic unit- 1 F (farad) • 1 farad is the capacity of an electric capacitor, which has a voltage of 1V and holds a charge of 1C. • Capacitance is: • Directly proportional to: • the active area S • permittivityε • Inversely proportional to: • the distance between the plates d • C= ε S/d • Definition of units of capacity

  3. Measuring capacity • Volt-ampere (Ohm’s) method – applied to the measurements of large impedances • Supply voltage must have a known and constant frequency • Involvement of a small C • Involvement of a large C • The used method:

  4. Measuring inductance • Calculation 1 – when an AC current: • We must know: • current • voltage • When we don’t know the value of the capacity CX we calculate it from basic data from an A-metre and a V-metre • Capacitive reactance • Of which we don’t know the capacity, the angular frequency – ω will help • Or the help of frequencyf

  5. Measuring inductance • Calculation 2: • When measuring it is important that there is an AC current flowing through the circuit • If not, you should make a re-count on a replacement scheme • Phasor diagram

  6. Measuring capacity • Measuring capacity distribution of an electric charge • The used method: • The measurement procedure: • The capacity of the capacitor C is known and the position I of switch p is charged with a voltage U and a charge Q. • Switch the switch to position 2; • by an unknown capacity CX connected in parallel to capacity C. • The charge is divided into two capacitors and the voltage U is subtracted again from the voltmeter. • For the switch applies • In position 1 - Q = U.C • In position 2 - Q = U.Cx + UxCx. • Unknown capacity of a capacitor

  7. Activities for students – questions • Describe how to define a unit of capacity • Name for what is the proportional capacity of the capacitor • Write what are the requirements for power voltage • Draw a circuit for measuring • small C • large C

  8. Activities for students – questions • Calculate an example: • A block capacitor has an unreadable data capacity; we can find out about the circuit with an ammeter. The ammeter showed a currentI = 2.76A at a voltage of 230V, 50 Hz • Capacitive reactance • XC = • Capacitance • CX=

  9. Bibliography • Mužík, J. Management ve vzdělávání dospělých. Praha: EUROLEX BOHEMIA, 2000. ISBN 80-7361-269-7. • Operační program Vzdělávání pro konkurenceschopnost, ESF 2007 – 2013. • Dostupné na: http://www.msmt.cz/eu/provadeci-dokument-k-op-vzdelavani-pro-konkurenceschopnost • Učebnice Elektrická měření – Ing. Pavel Vylegala, SŠE Ostrava, 2006 • Učebnice Elektrické měření – SNTL, 1981 • Elektrotechnika - Laboratorní cvičení pro bakalářské studium - Doc. Ing. Miloš Hammer, CSc.

More Related