1 / 7

Dominance Fault Collapsing

Dominance Fault Collapsing. Ravi Chandra Paruchuri Spring 2004. Definition. If all tests of fault F2 detect another fault F1, then F2 is said to dominate F1. In summary, The n-input boolean gate requires n+1 single stuck at faults to be modeled

Download Presentation

Dominance Fault Collapsing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Dominance Fault Collapsing Ravi Chandra Paruchuri Spring 2004

  2. Definition • If all tests of fault F2 detect another fault F1, then F2 is said to dominate F1. • In summary, • The n-input boolean gate requires n+1 single stuck at faults to be modeled • To collapse faults of a gate , all faults from the output can be eliminated retaining one type of fault (sa0 for AND and NAND; sa1 for OR and NOR) on each input and the other type on any one of the inputs • The output faults of the NOT gate and the wire can be removed as long as both faults on the input are retained • No collapsing is possible for fan out

  3. Algorithm • Reads the .eqf file and picks up one fault from each line and stores it in a file say .txt file • Reads the number of inputs from .lev file • Retain all the faults from the primary inputs • Drop the fault if its on the output line • Pick the fault if its not on any primary input or on any output line • If the fault is 0 (.int file) and the gates (.lev file) are either AND or NAND, see whether the other inputs have a fan out or not . If the other input doesn’t have fan out drop the fault else retain all the faults • Similarly, if the fault is 1 and the gates are either OR or NOR see whether the other inputs have a fan out or not. If the other input doesn’t have fan out drop the fault else retain all the faults

  4. Results • The number of faults in the dominance collapsed set is 16 as compared to 22 of the equivalent collapsed set for circuit C17. • The number of faults in the dominance collapsed set is 248 as compared to 301 of the equivalent collapsed set for the circuit 74181(ALU with NAND gates) All the results have been verified

  5. Demo !!!!

  6. Questions????

More Related