1 / 15

RC Circuits

RC Circuits. circuits in which the currents vary in time rate of charging a cap depends on C and R of circuit differential equations. I. Given: R, C, q o (initial charge) Find: q(t) and I(t) when switch is closed. q. C. R. -q. 1) . (Kirchhoff’s Loop Rule). 2).

adair
Download Presentation

RC Circuits

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RC Circuits • circuits in which the currents vary in time • rate of charging a cap depends on C and R of circuit • differential equations

  2. I Given: R, C, qo (initial charge) Find: q(t) and I(t) when switch is closed q C R -q 1) (Kirchhoff’s Loop Rule) 2) Discharging a Capacitor (- sign because q decreases for I > 0 That is, current in circuit equals the decrease of charge on the capacitor)

  3. Combine 1) and 2) to get: I where: q = q(t) q(0) = qo q C R -q This is a differential equation for the function q(t), subject to the initial condition q(0) = q0 . We are looking for a function which is proportional to its own first derivative (since dq/dt ~ -q).

  4. Solution: RC is called the “time constant” or “characteristic time” of the circuit. Units: 1 Ω x 1 F = 1 second (show this!) Write t (“tau”) = RC, then: (discharging)

  5. q Discharging qo t 2 3 t = , q ≈ 0.37 qo = (qo/e) t = 2 , q ≈ 0.14 qo = (qo/e2) t = 3 , q ≈ 0.05 qo = (qo/e3) t  ∞ , q  0 = (qo/e∞)

  6. Draw a graph for I(t).

  7. Example 1 • A capacitor is charged up to 18 volts, and then connected across a resistor. After 10 seconds, the capacitor voltage has fallen to 12 volts. • What is the time constant RC ? • What will the voltage be after another 10 seconds (20 seconds total)? • 8V • 6V • 4V • 0

  8. Then, where t =RC. Charging a capacitor C is initially uncharged, and the switch is closed at t=0. After a long time, the capacitor has charge Qf . C R Question: What is Qf equal to? What is V(t) ? Recall, C=Q/V, so V(t)=Q(t)/C

  9. Charging a capacitor q Qf t 2 3 t = 0, q=0 t = 3 RC, q 0.95 Qf t = RC, q 0.63 Qf etc. t = 2 RC, q 0.86 Qf

  10. Draw a graph of I(t). Why is I=+dq/dt this time?

  11. Example 2 100 kΩ The capacitor is initially uncharged. After the switch is closed, find: 12 V 2 µF • Initial current • Initial voltage across the resistor • Initial voltage across the capacitor • Time for voltage across C to reach 0.63*12V • Final voltage across the resistor • Final voltage across the capacitor

  12. Solution

  13. Example 3 The circuit below contains two resistors, R1 = 2.00 kΩ and R2 = 3.00 kΩ, and two capacitors, C1 = 2.00 μF and C2 = 3.00 μF, connected to a battery with emf ε = 120 V. No charge is on either capacitor before switch S is closed. Determine the charges q1 and q2 on capacitors C1 and C2, respectively, after the switch is closed.

  14. Solution:1) reconstruct the circuit so that it becomes a simple RC circuit containing a single resistor and single capacitor 2) determine the total charge q stored in the equivalent circuit.

  15. “RC” Circuits • a capacitor takes time to charge or discharge through a resistor • “time constant” or “characteristic time” • = RC • (1 ohm) x (1 farad) = 1 second

More Related