Acer Laptops are used in a wide range because of its unique designs, salient features, and best services. The one of the best laptops is Acer Aspire 3000; this is most endearing and enduring series of laptops. Sometimes users may face some internal issues which can easily be fixed with the help experts of Acer Support. In this blog, one of the informative and easy solutions is provided to repair an Acer Aspire Laptop. Follow the method carefully step-by-step.
Layout a soft cloth on a table or on a hard and flat surface. • Flip your laptop over so that its bottom is easily accessible. • Bring all the necessary tools like Phillips-star screwdriver, Phillips-star watch-screwdriver, a tiny soft-bristled brush; and in this case a couple of broken and sharpened hacksaw blades, within easy reach.
On the small panel at the right bottom of the hard disk cover, remove the two screws using the watchmaker screwdriver. Remove the panel now. • On the right side of the hard disk remove the recessed screw. • Using the hacksaw blades gently slide the hard disk to the right. • Take out the hard disk, and then brush the disk and recess clean.
Also, remove the two tiny screws on the small panel of the hard disk panel. Doing this RAM will be uncovered. • Pull the two white clips gently and also lift the RAM card/s at an angle of 45 degrees. • Remove the panel of the processor located beside the RAM housing. • Slowly remove the tiny screws for fan housing.
Clean the accumulated grime and vents using the brush. • Flip the laptop on its base and unscrew all the screws behind it. • Also, carefully unscrew the screws on the display bezel, lift out the display connectors with the lighting circuits. • Take out the back cover of display and clean it.
Now unscrew the screws of the keyboard, remove the optical drive screw, flip the open laptop over again and take out the optical drive. • Disconnect the main bottom panel, lift the main chassis vertically up and clean using the brush. • Clean rechargeable CMOS battery and also replace it if necessary.
Unscrew the screws that are holding the optical drive flange. Remove the flange and also the back plate. • Brush to remove any dust left. • Flip the drive over and clean the ribbon connectors, drive-door-opening, motor-spindle softly. • Insert the RAM card back.
We hope you are satisfied with the method provided to you in this blog. If you wish to submit repair request or need any help to solve some issues regarding Acer products, you can Contact Acer Technical Support. Make a call and talk to our agents, who will provide you the best solutions using the latest technology.
Get any type of technical support from our highly experienced technicians and get rid of your problems within short time duration. Content Source :
Acer Support Australia, Morisset NSW 2264, 1-800-875-256