1 / 7

At What Height is a Handrail Required in Canberra?

AB Fabrication a supplier of wrought iron fencing, furniture, staircases & handrails in Canberra with affordable prices. Also, provides structural steel balustrade & metal fabricators for homes & commercial places throughout all ACT. Call us on (02)62804109!<br>OR<br>Visit - https://www.abfabrications.com.au/<br>

Download Presentation

At What Height is a Handrail Required in Canberra?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Quality Fabrication Canberra services that you can count on. Metal Engineering Workmanship with Superior Grade Materials

  2. At What Height is a Handrail Required in Canberra?  When you decide about the construction of Handrails Canberra, you need to have complete knowledge of regulations according to Australian standards.  If they are not followed well, then there is a possibility of receiving a non-compliance letter from government authorities.  Handrails are installed for providing support to the people. Hence, the rules have been developed specifically to prevent height-related injuries.  Especially, platforms located high above the ground must follow the norms as a fall may cause major injury and life threat.

  3. Is A Handrail Compulsory?  If you check the rules and regulations, then handrailing is mandatory on the exposed sides of platforms, walkways, and landings when the height exceeds 300 mm.  As far as height regulations are concerned, it is measured vertically above the floor, nosing of a stair tread, or walkway surface. Should not be less than 900 mm or more than 1100 mm. And it should be consistent throughout the ramp, stairway, or landing.

  4.  The height of the top of the handrail should be consistent through the ramp, stairs, or landing.  When there is a possibility of people falling from a platform or landing onto an area where people have access to the area below, it is advised to install a toe board.

  5. When Should You Use The Handrail?  The purpose of installing a Handrails Canberra or physical rail is simple.It saves people moving along landings or surfaces that pose the risk of injury due to falls. If the height is more than 300 mm above the ground, then it is mandatory as per the rules laid by authorities.  The building code states the circumstances when a handrail is necessary.  Barriers or balustrades also save people from falling off.When the areas are not bound by walls and the height is more than 1 meter abovethe ground level, you need a balustrade or barrier. Its height must not be less than one meter. On stairs, it should be minimum 865 cm height.

  6.  When you keep openings between balustrades, it should not let pass a spherical object more than 125mm to pass through. Any platform thatis more than 4 meters above the floor below, you need to construct anything horizontal or barrier or between baluster must be constructed in such manner that it is impossible to climb.  These regulations should be kept in consideration whileinstalling handrails. They are required to be constructed as per Australian norms.

  7. Contact Us  Address - 3/9 Collie St Fyshwick ACT 2609, Australia  Workshop: (02)62804109  Anthony: 0419625748  Email – anthony@abfabrications.com.au  Visit - https://www.abfabrications.com.au/

More Related