Project Long Tom OTTR

1. Project Long TomOTTR Team Annette DeVille Tom Kinnear Jeff Scott • Advisor • Dr. Aziz Inan • Dr. Peter Osterberg • Industry Representative • Mr. Mike Desmith • Intel University of Portland School of Engineering

2. Overview • Introduction • Scorecard • Additional Accomplishments • Plans • Issues/Concerns • Conclusions University of Portland School of Engineering

3. Introduction • What is OTTR? • Benefit: • Security • Use of statistics for a room University of Portland School of Engineering

4. Scorecard ALL COMPLETED!!! • Individual digital logic designs due 28 Oct. • Combine the three designs into one circuit • Send final .edf file to Dr. Osterberg by 23 Nov • Project Plan 0.9 • Work on budget • Purchase and assemble second IR sensor • Start looking for UART University of Portland School of Engineering

5. Additional Accomplishments • Completed Project Plan .95 and 1.0 • Website is up and running http://lewis.up.edu/EGR/SRDesign06/longTom/ University of Portland School of Engineering

6. DirectionSensor University of Portland School of Engineering

7. Counters and Display University of Portland School of Engineering

8. Plans for December • Work on the logic for our off chip design • Work to get a useable output from the sensor • Continue to look for a UART to use • It’s not that the UART won’t work, it’s just finding one that will work best with our project University of Portland School of Engineering

9. Milestones University of Portland School of Engineering

10. Concerns/Issues • Interfacing with software & UART • Again, it’s not that the UART won’t work, it’s just finding one that will work best with our project • Retrieving a useable output signal from the sensor University of Portland School of Engineering

11. Conclusions • Completed all our tasks from November • Most important – turning in .edf file • 30% done with project University of Portland School of Engineering