1 / 13

Tips For Water Heater Maintenance And Installation

Tired of dealing with water heater issues? Check out this tips for water heater maintenance and installation. For professional help contact water heater repair San Diego.<br>https://www.ezplumbingusa.com/san-diego-water-heater-repair-installation/

Zara11
Download Presentation

Tips For Water Heater Maintenance And Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TIPS FOR WATER HEATER MAINTENANCE AND INSTALLATION WWW.EZPLUMBINGUSA.COM

  2. SPACE AROUND THE GEYSER: When you are installing a water heater, remember to keep some space between the apparatus and the walls. If the technician does not have enough wriggle room to check out the water heater parts, they will not be able to service it or repair it properly. Hire expert technicians from UrbanClap to get the installation properly.

  3. PUT THE WATER HEATER AT A SUFFICIENT HEIGHT

  4. ELECTRICAL CONNECTIONS AND SWITCHES: Ensure that the geyser is connected to a Miniature Circuit Breaker (MCB) that cuts off electricity in case of power fluctuations. This will minimise chances of any short circuit in the water heater. Also, keep the switch at a sufficient height away from small children but not too high that you or any adult has problems while trying to reach it.

  5. DO NOT KEEP THE GEYSER SWITCHED ON FOR EXTENDED PERIODS

  6. SAVE MORE ELECTRICITY BY LOWERING THE TEMPERATURE Source URL : https://bit.ly/3FtfmbE

  7. CHECK THE ANODE ROD INSIDE THE TANK BEFORE WINTER

  8. CHECK THE PRESSURE RELEASE VALVE Check at least once a year if the temperature and pressure release valves are working. You can check this by releasing the pressure a couple of times. It is a major issue if the relief valve at the water heater is leaking. You just need to drain some water out of your water geyser and remove the discharge tube. Thereafter replace the valve and it’s done!

  9. KEEP AN EYE ON THE PLUG Power fluctuations and using low capacity wiring for the power socket means your switch will make a spark every now and then. You will also notice burn marks on your plug’s pins as the higher electricity wattage will heat up the plug and the pins and leave burn traces.

  10. REPLACE THE PLASTIC INLET AND OUTLET PIPES WITH METAL ONES

  11. GET AN ANNUAL MAINTENANCE DONE

  12. CONTACT US Address : 10320 Camino Santa Fe Unit E, San Diego, CA 92121 Phone : (760) 906-8777 Website : www.ezplumbingusa.com

  13. THANK YOU

More Related