,
Xbox 360 Controller Troubleshooting There could be no more frustrating than taking your Xbox 360 controllers leave the workplace. If you find your Xbox 360 controller is in fault, it is recommended to try fixing it before calling Microsoft for repairs or cost the video store to get a refund. Though some issues do require repair or replacement, many complaints are easily fixed in seconds. http://klingecantrell67.blog.com/2016/07/02/duck-hunt-history-the-original-shoot-the-duck-game/ Follow this troubleshooting guide, and you will have your Xbox 360 controller working again quickly in any respect. Problems: 1. The Xbox 360 wireless controller can't connect or stay a stable link with the Xbox 360 console; 2. Four green lights flash Longer than 15 Seconds When Connecting; 3. Error message: Please reconnect controller. Reasons: 1. Most with the time, it's due to a challenge of without needing enough internal power supply to convey using the Xbox 360 console; 2. Interference business wireless devices; 3. Metallic objects are in the area the Xbox 360 controller; 4. The distance between your Xbox 360 controller and Xbox 360 console is simply too far. Solutions: Ⅰ. Check the Batteries Xbox 360 controllers are very well renowned for their battery issues. While the batteries of Xbox 360 controller most likely are not as bad as being the Wii's in relation to draining power, they still require frequent changes. 1. Turn off your Xbox 360 console, wait a short while, and turn it on again by pressing the middle button within the Xbox 360 controller. Pay attention for the ring of light around the middle button; if this doesn't blink whenever you turn for the Xbox 360 console, you might need fresh batteries as well as to reconnect your controller. 2. Replace the batteries with your wireless Xbox 360 controller by pushing the tab around the top from the controller and pulling battery compartment out. Ensure the fresh batteries are inserted properly, and reconnect battery compartment; it clicks back to place. 3. Re-sync your Xbox 360 controller for your console. Press the tiny round button next for the second memory unit port within the console. Then press your little friend round button within the top with the controller nearby the left shoulder button. Wait a moment for syncing; the ring of light around the middle button will blink even though this happens. 4. Recharge your controller if employing a rechargeable power supply as outlined by their instructions. You may need to re-sync your controller after recharging. Ⅱ. Avoid Metal Large metallic objects may cause interference between Xbox 360 console and also the wireless controller. Position yourself at the very least one meter away clear of any large metal cabinets, tables, for instance file cabinets, mirrors, and refrigerators to ensure there isn't a interference on the Xbox 360 controller. This also applies any metallic decorations or stickers. Ⅲ. Channel Interference One of the most extremely common problems in terms of smooth performance is interference using modern technologies. Cordless phones (2.4 GHz), wireless LANs, wireless video transmitters, microwave ovens, mobile phones, Bluetooth headsets, and baby monitors may cause issues to arise. Turn these off or unplug them and retry connecting to determine if performance is restored. Ⅳ.Move Closer Make sure the leading on the console lies in the direction in the controller. The Xbox 360 controller was designed to work from the distance of 20 feet through the console. With that form of range, you could think you're safely inside the required diameter. Still, it doesn't matter what the instructions might say, distance matters. If the red lights are flashing in your controller also it won't connect, try moving 5 feet closer and find out if it doesn't solve the situation.