Self Fitting Shutter for Sale in Central West NSW & Adelaide - The Wood Blinds Factory - PowerPoint PPT Presentation

self fitting shutter for sale in central west nsw adelaide the wood blinds factory n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
Self Fitting Shutter for Sale in Central West NSW & Adelaide - The Wood Blinds Factory PowerPoint Presentation
Download Presentation
Self Fitting Shutter for Sale in Central West NSW & Adelaide - The Wood Blinds Factory

play fullscreen
1 / 7
Self Fitting Shutter for Sale in Central West NSW & Adelaide - The Wood Blinds Factory
58 Views
Download Presentation
WoodBlinds
Download Presentation

Self Fitting Shutter for Sale in Central West NSW & Adelaide - The Wood Blinds Factory

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Self Fitting Shutter for Sale in Central West NSW & Adelaide - The Wood Blinds Factory

  2. About Us The Wood Blinds Factory is a family business based in Millthorpe ( a small town between Bathurst & Orange in the Central West of NSW ) which now also operates in Adelaide.

  3. Self Fitting Shutter Shutters are beautiful addition to any home or office and can provide either a classic or contemporary look. Plantation shutters are terrific for privacy and light control as well as having great insulating properties. We provide self fitting shutter for sale. These are simple and easy to install.

  4. Self Fitting Shutter Step 1 Linking The Frame. • Your frames are marked on the mitered ends to show which end links to which. top, left, right and bottom. • Place the frame lengths on the floor with the bow tie cuts on the back of the frame facing towards you. • To avoid damage to your floor, place a small piece of packing cardboard between the hinge on the frame and your floor. • Tap a plastic bow tie fixing between 2 frame lengths, to link them together.

  5. Self Fitting Shutter Step 2 Fixing The Frame. • Take the assembled frame and lift to window. • Place the frame in the position established when you measured. • Take a long screw and drill into one of the holes on the left hand side of the frame.

  6. Self Fitting Shutter Step 3 Adjusting Your Installation. • You can now fix the remaining screws into the frame. • When done, raise and lower the panels if required by loosening the hinge screws (1) and moving the panels slightly. • When happy with the level, insert the hinge locking screw into the round hole on the hinge (2).

  7. Contact Us New South Wales Factory and Showroom 1 Hawke Street. Millthorpe NSW 2798 Tel: 02 6366 3699 Fax: 02 6366 3622 Hours of Operation Mon - Fri 9:00am - 5:00pm South Australia Office and Showroom 673 Brighton Road, Seacliff SA 5049 Tel: 08 8377 5200 Fax: 08 8377 5211 Hours of Operation Mon - Fri 9:30am - 5:00pm Sat 10:00am - 3:00pm