Why Is The TP-Link WiFi Extender Not Working

1. Why Is The TP-Link WiFi Extender Not Working? In today’s time when most of your work is dependent on fast and good internet, it is unaffordable to have any issues with the internet. Whereas TP-Link extender delivers a great signal strength and network coverage sometimes it can also stop working due to some issues in connection or otherwise. There can be many stimulants behind your TP-Link wifi extender not working. But, with the right TP-Link extender troubleshooting, you can rule out the problems and resume having a faster and better internet. TP-Link Extender Troubleshooting Tips To resolve The Various Errors - 1. Check the printer’s power connection: When you connect the printer to the power supply socket make sure the cord is connected properly. The power supply should be consistent and regular. The power LED light indicator must be solid and lit which implies the printer is receiving power. If the LED light is blinking then it implies it is trying to receive power but the connection is not established. You can connect the extender to the wifi router using a wired or wireless method of connection. 2. Check the internet connection: When the TP-Link wifi extender is not working then there are chances that the wifi router to which it is linked has poor network signals and connection. Ensure that the wifi network is active and stable. The internet should be good. To check if there is a problem with the wifi router network, connect any device to the wifi router directly and access any web page, if it loads then it implies the internet is good and if it does not open then contact the ISP for further information on it.

2. 3. Upgrade the firmware of the TP-Link extender: Sometimes the reason behind the TP-Link extender not working is due to the outdated or corrupt firmware versions. For this, you need to keep a check on the recent versions of firmware and upgrade it accordingly. To update the firmware go to the tplinkextender.net website. 4. Restart Your TP-Link Extender Device: If you have attempted all the steps mentioned above then, try rebooting the device. Sometimes restarting a device refreshes the system which makes it work better. For that, switch off the TP- Link wifi extender and leave it idle for approximately 5 minutes. After that, switch it on and then check if the TP-Link wifi extender is working or not. 5. Attempt Hard reset function your TP-Link wifi range extender: If nothing responds and you are still not able to use the TP-Link wifi extender then it is recommended to perform a hard reset function. For that you need to take a pointed object like a pen, pencil, or pin and then locate the reset button on the device. Press it and your device will be reset. Now check whether it is working or not. Though, hard reset resolves the matter and your TP-Link wifi extender will stop working. TP-Link Wifi Extender Working Just Fine! When you perform the above-mentioned TP-Link extender troubleshooting tips you will not face any issues. When your TP-Link wifi extender is not working then check for the various aspects as stated above and take troubleshooting steps accordingly. Now, you are sorted and can enjoy limitless internet with your TP-Link wifi extender.