Complete Guide For Wifi Repeater Setup

1. Complete Guide for Wi-Fi Repeater Setup Did you just search for ‘my repeater setup’ on your browser and it brought you here? Well, you have just landed on the right page for a wifi repeater setup. If your router is perfectly set up, it is perfectly placed on the right and central spot in the house and still not working then the problem is not with your router. You need an extra gadget to extend the network across your home and improve the signal strength. The wifi repeaters are doing a pretty good job in that. You just need to do the wifi repeater set up along with your wifi router and you can enjoy all the great networks. Follow the tips listed below for ‘my repeater setup’ in an easy way; Stepwise Guidelines For Wifi Repeater Setup - 1.Look for a place where you can place your wifi repeater that has no radioactive or other obstructions such as thick concrete walls, which hinder the repeater connection with the router. 2.Now, plug the wifi repeater into a perfectly working power socket in the chosen location which is in the range of your wifi router. 3.Connect the wifi repeater using a PC device. The connection can be established by using an ethernet wire by directly attaching it to the repeater and the PC device. 4.You can also connect over the wireless network. 5.Once the PC device and wifi repeater are connected, then launch the computer’s local area network properties. 6.In the next step, hit the Windows button to launch the start menu. From there launch the control panel. 7.Now you have to select the ‘View NetworkStatus and Tasks’ tab. 8.After that, click on the manage network connections option. 9.Now, right-click on the Local area network and select the properties option. 10.Afterward, choose the Internet protocol version 4 and the properties once again.

2. 11.Now, verify the wifi repeater’s guidelines to be sure. You have to enter an IP address in the respective field that is 192.168.10.1. You have to enter the subnet mask i.e, 255.255.255.0 too here. Now, type the default gateway 192.168.10.1 to proceed. 12.The next step is to launch the web browser and type http://192.168.10.1 in the address field. If the DNS server address field is prompted, leave it empty. 13.For the username and password fields, enter ‘admin’ in the lower case and then press the ok button. 14.This will open the Setup wizard on your screen. 15.Select the wireless repeater mode and hit the repeater option - One Key setting. 16.After it reflects on the screen, choose the main router’s wireless network selection button and tap on the refresh list. 17.Now, select your prime router’s wifi network to link to the repeater and hit the next button. 18.Type your wireless router’s password in the pre-shared key box. Hit the apply tab and click on the Ok button. 19.Finally, your wifi repeater setup is finished and you can enjoy the wireless signal in any part of your home. Wifi Repeater Setup Complete! Here your wifi repeater setup gets complete. Now you don’t need to do any more google searches for ‘my repeater setup’ because we have explained the wifi repeater set up in the most convenient way possible. Enjoy the high-quality videos and Instagram surfing just from any spot!