Download
1 / 7
70 likes | 76 Views
While cleaning the ACP panels you must be aware of their dou2019s and donu2019ts. You must not use cleaning agents such as vinegar, caustic soda or, potassium hydroxide, as the panels are lacquered and can cause surface damage to the panels. In the following I have mention 5 points you should pay more attention to while cleaning your ACP panels. For more information Visit: https://allaboutacp.weebly.com/blog/things-to-keep-in-mind-while-cleaning-your-acp-panel
E N D
Introduction ACP or Aluminium Composite Panels are flat leveled panels that are composed of two thin sheets of aluminium coating and a polyethylene core. The ACP panels are known for their diverse application in interiors, exteriors of architectural buildings, and signboards. Among their many uses, aluminium composite panels are frequently used to cover pillars and false ceilings.
Here are 5 points you should pay more attention to while cleaning your ACP panels. Be gentle Clean soil, dirt, and sand Clean impurities Time selection Selection of proper cleaning agent
Here are 5 points you should pay more attention to while cleaning your ACP panels. Be gentle- Recall that ACP panels are not scratch-resistant. Even though the aluminium composite panels have a durable exterior, it is advised to clean them gently. Using aggressive cleaning agents on the surface of the panels is not recommended. he panels may be cleaned and dusted off with just water and regular detergent. Clean soil, dirt, and sand- Cleaning the ACP sheets in industrial buildings that are situated in more dust-prone areas requires extra caution. To prevent scratches, it is advised to use a forceful flushing technique on ACP sheets from a higher surface level to the lower surface level. It is suggested to clean the panels with a mild detergent if they look to be blackened.
Here are 5 points you should pay more attention to while cleaning your ACP panels. Clean impurities- The ACP panels' natural colour and sheen are being worn away by impurities and pollution. The bright appearance of the panel can be preserved by using cleaning solutions and detergents. To prevent drips and water stains, it is best to wipe the aluminium composite panels from higher to lower surface levels. Time selection- The choice of the cleaning period for the ACP panels is crucial. The aluminium used to make the ACP panels, like other metals, expands and shrinks in response to changes in temperature. Therefore, picking a time of day to clean the panels is crucial. Cleaning ACP panels early in the day or late at night will minimise expansion and contraction. When possible, avoid cleaning your panels in the height of the day, whether it's summer or winter. Selection of proper cleaning agent- Using a powerful cleaner to clean the planes may do more harm than good to the panels. When choosing a cleaning product, specific considerations such the Ph level and toxins must be made. Before using the cleaning chemical on the full ACP panel, it is suggested that you patch test it on a small portion of the panel.
Conclusion You must be mindful of the ACP panels' dos and don'ts when cleaning them. Because the ACP panelsare lacquered and can be damaged on the surface, cleaning agents like vinegar, caustic soda, or potassium hydroxide must never be used on them. Additionally, if the building is still in progress, I advise you to keep the panels covered because it is difficult to remove machine grease, cement, and sealants from the surface of aluminium composite panels.
