1 / 8

BIM Modeling Facilitating Mechanical & Plumbing Contractors in the USA | Tejjy Inc.

Tejjy Inc, Provide to BIM engineering services & catering to strive for excellence with innovation in Maryland MD, Washington DC, Virginia VA, Baltimore, USA. Call us at 202-465-4830 or email us at info@tejjy.com to discuss with us your project idea or requirements.

TejjyInc
Download Presentation

BIM Modeling Facilitating Mechanical & Plumbing Contractors in the USA | Tejjy Inc.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BIM Modeling Facilitating Mechanical & Plumbing Contractors in the USA

  2. BIM Services for Mechanical & Plumbing Contractors • 3D BIM Modeling with Constructability Review • BIM Mechanical & Plumbing Design Validation • BIM Clash Detection & Coordination • BIM Shop Drawings & Fabrication Drawings • BIMQuantity Take-off Click to read more on BIM Services

  3. 3D BIM Modeling with Constructability Review • HVAC Sheet Metal Model Creation for all trades of MEP/FP with Hangers, Trapeze &Seismic Restrains • Clash Removal through re-routing ductwork, changing elevation &duct re-sizing • BIM Value Engineering & MEP Design Validations

  4. Bim Mechanical & Plumbing Design Validation • HVAC Design Validation • Heat Load Calculation • Duct Sizing & Routing for HVAC Systems • External Static Pressure Calculations • Equipment Selection & Schedule • Pipe Sizing & Routing for Chilled Water Systems • Pump Head Calculations for Chilled Water Systems • Plumbing Design Validation • Pump Head, Water Demand & Storage Tank Calculations • Pipe Sizing & Routing for Water Supply Systems • Designing Drainage System • Layout Generation as per standards • Hot/Cold Water Distribution System & Water Demand Calculations • Selection & Schedules of Fixtures & Fittings

  5. BIM Clash Detection & Coordination • Resolve issues during the pre-construction stage, saving cost & time • Verify space allocated for services with 3D BIM Model, checking interference with other services • Detect collisions with structural, ceiling, framing, partitions, equipment, electrical, mechanical, plumbing, lights, conveying systems & other services

  6. BIM Shop Drawings & Fabrication Drawings • Installation Shop Drawings to help contractors plan, execute & install mechanical work • Block-Out Drawings aligning with architectural grids • Sleeve, Insert &Hanger Drawings, producing accurate Sleeve, Insert & Hanger positions from 3D BIM Model to help construction team before plumbing installation • Spool Drawings to create plumbing segments from the model for accurate off-site or on-site pre-fabrication • Equipment Detailing & Pad Layout referencing architectural grids & structural drawings for proper installation of HVAC equipment from Approved Submittals in appropriate locations, coordinating accessibility

  7. BIM Quantity Take-off • Detailed &Tabulated Quantity Take-off for Procurement, Fabrication & Installation • Accurate Quantity Information & Cost Estimate throughout Project Lifecycle • Quantity Generation for a specific time period or project area (4D/5D) for material management, procurement &saving inventory costs

  8. Presented by Tejjy Inc. • Contact – 202-465-4830/ info@tejjy.com • https://www.tejjy.com/ Our Services Click to read more - https://www.tejjy.com/our-services/

More Related