Begin Your Success Journey with VMware VCP-NV (2V0-41.20) Certification

1. How to Prepare for VMware VCP-NV Certification? VMware 2V0-41.20 Certification Made Easy with VMExam.com.

2. VMware 2V0-41.20 Exam Details 2V0-41.20 Exam Code Professional VMware NSX-T Data Center Full Exam Name 70 No. of Questions Online Practice Exam Sample Questions VMware 2V0-41.20 Sample Questions VMware Certified Professional - Network Virtualization 2021 (VCP-NV 2021) Practice Test 300 / 500 Passing Score 135 minutes Time Limit $250 USD Exam Fees Enjoy the success with VMExam.com

3. How to Prepare for VMware 2V0-41.20? • Perform enough practice with with related VCP-NV certification on VMExam.com. • Understand the all Exam Topics very well. • Identify your weak areas from practice test and do more practice with VMExam.com. Enjoy the success with VMExam.com

4. VCP-NV Certification Exam Topics Syllabus Topics VMware vSphere Architectures and Technologies VMware Products and Solutions Planning and Designing Installing, Configuring, and Setting Up a VMware vSphere Solution Performance-tuning and Optimizing Upgrades Troubleshooting and Repairing Administrative and Operational Tasks in a VMware vSphere Solution Enjoy the success with VMExam.com

5. VCP-NV Certification Exam Training Training: VMware NSX-T Data Center: Install, Configure, Manage [V3.0] Enjoy the success with VMExam.com

6. VMware 2V0-41.20 Sample Questions Enjoy the success with VMExam.com

7. Que.01: An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router. What sequence of commands could be used to check this status on NSX Edge node? Options: a) - set vrf <ID> - show logical-routers- show <LR-D> bgp b) - show logical-routers- get vrf - show ip route bgp c) - enable <LR-D> - get vrf <ID> - show bgp neighbor d) - get logical-routers - vrf <number> - get bgp neighbor Enjoy the success with VMExam.com

8. Answer d) - get logical-routers - vrf <number> - get bgp neighbor Enjoy the success with VMExam.com

9. Que.02: Which CLI command does a NSX administrator use to obtain information about the NSX Manager configuration when troubleshooting a production system? Options: a) show configuration b) get managers c) show interface d) get configuration Enjoy the success with VMExam.com

10. Answer b) get managers Enjoy the success with VMExam.com

11. Que.03: Which three networking features could be configured using the NSX Manager Simplified UI? (Choose three.) Options: a) NAT Rules b) containers c) load balancers d) logical routers e) segments f) logical switches Enjoy the success with VMExam.com

12. Answer a) NAT Rules c) load balancers e) segments Enjoy the success with VMExam.com

13. Que.04: A centralized packet analysis tool VM configured to monitor a NSX-T deployment is dropping some of the packets sent to it. Which three actions could minimize the drops? (Choose three.) Options: a) Increase the RX buffer ring size. b) Assign more CPU resources to the VM. c) Use DPDK to improve packet processing performance. d) Ensure the host 10GbE NIC is configured for full duplex. e) Increase the TX buffer ring size. f) Increase MTU on the VM to 9000. Enjoy the success with VMExam.com

14. Answer a) Increase the RX buffer ring size. b) Assign more CPU resources to the VM. c) Use DPDK to improve packet processing performance. Enjoy the success with VMExam.com

15. Que.05: Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting? Options: a) set service manager logging-level debug b) set service nsx-manager logging-level debug c) set service manager log-level debug d) set service nsx-manager log-level debug Enjoy the success with VMExam.com

16. Answer c) set service manager log-level debug Enjoy the success with VMExam.com

17. Follow Us Enjoy the success with VMExam.com