Mopping is a chore that can be extremely exhausting but has to be done. After all, no floor is ever completely clean, even with a rigorous sweeping job, until it’s been wiped clean with a little bit of water for that perfect shine. There are now a variety of mops out on the market, all with their own pros and cons, all meant to make the task much easier. However, whether you’re using a yacht mop, a microfiber mop, or even a hurricane spin mop for cleaning from brands like Fuller, you won’t get your floor clean if you’re not using the right techniques to get rid of all the dirt on your floor.
In this eBook, we will talk about a few tips on how to do smarter mopping: 1. Plan Your Mopping Route 2. Don’t Forget to Sweep First 3. Mop Along the Grain 4. Keep Your Water Clean 5. Mop with Your Arms * Conclusion
Plan Your Mopping Route Don’t you just hate it when you’ve finished mopping the floor, only to find that you have mopped yourself into a corner and now have to step all over the wet floor just to get out of the room? This is why it’s important to have a plan before you start cleaning.
Here is a tip from Cleanipedia: Ideally, you should begin from the back of the room, at a corner that is on the opposite end from the exit. Then, keep mopping toward the exit, instead of going back further into the room. Quick tip: do not forget to bring your bucket along behind you rather than in front of you for convenience.
Don’t Forget to Sweep First According to Melissa Maker of CleanMySpace, it’s important to get all of that dirt and debris off the floor first by sweeping or vacuuming. Otherwise, you will just be fruitlessly pushing them around, keeping your floor dirty no matter how hard or how long you mop.
You might even make the floor dirtier than when you started out, with ugly black or grey streaks. That’s not the end result we want, so make sure to take the extra time to clean the floor first using dry methods before moving on to any wet methods of cleaning.
Mop Along the Grain A lot of people end up frustrated when their mopping ends up giving their floor a ton of unsightly streaks. However, there’s a very easy way to prevent this from happening, especially if you have hardwood floors.
Instead of mopping against the grain of the wood, try to mop in the direction of the grain instead. If you do this, any streaks that might result will be following the grain of the wood, making them much less noticeable. In case there are some streaks left, you can rid of them by using a clean microfiber cloth to wipe the floor dry.
Keep Your Water Clean You can mop and mop as much as you want, but if the water that you keep in your bucket is dirty, you’ll just end up putting the dirt back onto the floor, according to CleaningClues.
Because you’re cleaning a dirty surface, it should come as no surprise that the water that you’re using can get dirty fairly quickly. That’s why you should make sure to change your water if it starts looking even a little bit too dark or murky. Otherwise, you’ll just be putting dirt back onto the floor instead of getting rid of it. After all, who will try to clean something by using something dirty?
Mop with Your Arms When mopping, most of us have a tendency to start using our back in order to push the mop forward and then pull it back. However, this method can put way too much strain on your back, especially if you like to mop in an ‘S’ pattern.
Instead of using your back muscles, try to use your arm muscles instead. Not only will you get the job done much more efficiently, but you’ll also prevent any further injuries to your body, and you will still end up with a spotless floor.
Conclusion Though the simple act of pushing a mop around a floor seems like a task that does not need a lot of strategy, taking the time to learn how to do it properly can actually save you a lot of time. Not only that, but it will make the chore much less stressful, especially on your physical health. Keep these tips in mind the next time that you need to clean the floor, and you will get better results with a lot less effort and a lot less fatigue.
Social Accounts Est: 1906 B Y Company Name: Fuller Brush Company Address: 15 SW 40 Ave City: Great Bend State: KS Country: USA Zip Code: 67530