Συντήρηση καυστήρων φυσικού αερίου

1. Burner Maintenance Procedure Economy Services The burner maintenance is a complex process that requires expertise, thus the prescribed provisions on the security of your burner and tips so you too can properly maintain your boiler and to identify any problems during the year. Burner Maintenance Legislation The maintenance of the burner is mandatory by the state, and necessary because the required operating and fuel saving specifications are ensured. Burner maintenance must be performed by licensed burner maintenance in order to operate safely, economically, and functionally. The most suitable time for the maintenance of the burner is during the months May - June - July, to avoid combustion residues in the boiler (for oil) all summer so as not to reduce the life expectancy of the boiler, either steel or cast iron. At Alpha Gas: We work in accordance with existing legislation to always comply with the safety standards for your heating system. We offer complete solutions depending on the material of your boiler, we suggest the type of cleaning (dry, chemical, etc.) required depending on the condition of your boiler. Finally, we issue the combustion control sheet provided by YPEKA which lists the services we offered, the condition of the entire system and we make sure to provide you with a copy of this sheet. Burner Maintenance Consumption Economy Invest in your burner maintenance to get the most out of it. Maintenance is a process that must be done regularly, not to be neglected as only in the long run its usefulness can be seen. The

2. cost of replacing or repairing a serious burner fault is much higher than the low maintenance cost. In this way, fuel economy is achieved, as well as unnecessary expenses. Trust the advice of experts on the maximum efficiency of your burner and the minimum possible loss during the winter months. The cost of burner maintenance is less than the burden from the increased consumption of an unmaintained burner and in addition the case of damage and wear of the machines is minimized. Burner maintenance Procedure We recommend the maintenance of the burner and the boiler which includes: Why usBoiler cleaning and chimney corner Why usBurner setting Why usControl of automation instruments Why usCheck safety devices Why usMeasuring the internal degree of efficiency Why usIssuance of combustion control sheet according to the standards of YPEKA. Why usAnd all this with the best electronic digital instruments on the market Contact us Krissilas, A., & Co. O.E. "Alpha Gas" Ipourgou Filippou Dragoumi 16, Thessaloniki 546 35, Greece

3. 2310 247 577 More Information :- www.alpha-gas.gr