1. Setting up a new extender at your home is not a tough task as you just need to follow these 10 steps in an organized manner. Step 1: Start with unboxing the New Netgear WiFi Extender. Step 2: The next step is to plug the device into a relevant power socket. Step 3:It’s time to turn on the device and make sure that the LED lights on the same blink in solid green color. Step 4: Using an Ethernet cable, establish a connection between the router and the extender. Step 5: Now you need to enter the required website link to reach the login page of the extender. If you are using iOS and Mac, then enter www.mywifiext.local. For Windows users, you can fill in www.mywifiext.net or 192.168.1.250 in the required space of the web browser. Step 6: Enter the default credentials; the username and the password and wait for a few minutes so that Netgear scan New Extender. Step 7: After pressing ENTER, you will see a list of available networks. Pick the one that you want to expand. Might be, you need to enter the password here. After doing so, click CONTINUE.

2. Step 8: Make changes in the SSID and other security options like LAN, WLAN, WAN, etc. Step 9: To complete the installation process, click on the finish button. Step 10: Decide the location of the Netgear extender. You can move it anywhere you want to. Make sure that the place is at some height where the signals can be transmitted easily in all directions. Other than that, keep the extender away from electronic devices like microwaves, televisions, etc. In this way, you can set up the Netgear extender at your home by following these few simple steps. During the process, make sure that you use the right 192.168.188.1 wireless extender setup details including the username and password. For further assistance or additional information, please don't hesitate to visit our website at https://192168111.net/ or reach out to us via email at support@192168111.net. We appreciate your time and look forward to serving you.