Thermodynamic Steam Trap Manufacturer in India

1. Thermodynamic Steam Trap Manufacturer in India Specialityvalve is one of the best Thermodynamic Steam Trap Manufacturer in India. AThermodynamic steam trap is a device used to discharge two types of gases i.e., condensates and non-condensable gases with a negligible loss of live steam. Thermodynamic Steam traps are automatic valves. They open, close, or modulate automatically. It can only be operated in very high temperatures and pressures. The thermodynamic steam trap is an extremely robust steam trap with a simple mode of operation. The trap operates using the dynamic effect of the flash steam as it passes through the trap. The only moving part is the disc above the flat face inside the control chamber or cap. On start-up, incoming pressure raises the disc and cools condensate immediately and then discharges from the inner ring, under the disc, and through three peripheral outlets. Hot condensate flowing through the inlet passage into the chamber under the disc drops in pressure and releases a flash system moving at high velocity. At the same time, the flash steam is trapped in the upper chamber and the pressure above the disc equals the pressure being applied to the underside of the disc from the inner ring. Eventually, the disc is raised by the higher condensate pressure, and the cycle repeats. Advantages of the thermodynamic steam trap: •It can operate across the entire working range without any changes •It has a large condensate capacity for their size •It can be used in high pressure and superheated steam •Easy to maintain •It is not affected by water hammer.

2. Disadvantages of the thermodynamic steam trap: •It will not work in low differential pressures •The discharge of the trap can be noisy •The inlet pressure builds up slowly Industries of thermodynamics steam traps: •Petrochemical Industry •Chemical Industry •Textile Industry Description: •Material: Ductile iron, Cast Iron, Carbon Steel, cast steel (WCB, WCC, LCC, LCB, WC6, WC9), Stainless Steel (SS316, SS304, CF8). •Class: 150 - 1500, PN10 – PN250. •Size: ½” to 2”. •Ends: Socket weld, butt weld, flanged, threaded. https://www.specialityvalve.com/product-category/thermodynamic-steam- trap/ Thermostatic Steam Trap Manufacturer in India: Specialityvalve is the greatest Thermostatic Steam Trap Manufacturer in India. The thermostatic steam trap operates in response to the surrounding steam temperature. It works on the difference in enthalpy of steam and condensate. A capsule attached to a bellow filled with the precise amount of hydrocarbon expands and contracts in response to the rising or lowering of enthalpy.

3. The thermostatic steam trap operates in response to the surrounding steam temperature. The operations of this steam trap are liquid expansion traps, and bimetallic and balanced pressure thermostatic traps. A thermostatic trap responds to changes in temperature. They differentiate very well between steam and cooler non-condensable gases. The pressure greatly determines the temperature of saturated steam. To stop further heat loss, the condensates temperature will drop. As the steam travels to the trap, the temperature will increase and the trap will close. Thermostatic Steam Trap partly relies on the formation of the flash steam from the condensate. These traps cannot determine steam and other non- condensable gases. Steam traps are associated with the disc, impulse, and labyrinth traps. Advantages of thermostatic valve ⚫Modulates to handle light or heavy weight ⚫Large ports handle high capacity ⚫Cast iron bodies Disadvantages of thermostatic valve ⚫Primary failure is closed ⚫If there is a small extent of superheating Applications of thermostatic valve ⚫Cooling water control ⚫Drain tempering ⚫Steam tracing control ⚫Thermal bypass ⚫Washdown stations Material: Ductile iron, Cast Iron, Carbon Steel, A105, SS316

4. Size: 3-4 inch Class: 150 to 1500, PN10 to PN200 Ends: Socket weld butt weld, Flanged, threaded. Specialityvalve is the leading Thermostatic Steam Trap Manufacturer in India which provides premium quality products which comes in various materials and designs. All the products are tested according to the requirements and standards of clients. https://www.specialityvalve.com/product-category/thermostatic-steam-trap/