Steam Trap Manufacturer in India

1. Steam Trap Manufacturer in India Specialityvalve is famous as Steam Trap Manufacturer in India. A steam trap is an automatic valve that filters out condensate and non-condensable gases like air without letting steam escape. It is used regularly for heating or as a driving force for mechanical power. Steam trap applications ensure that steam is not wasted. It is installed when steam is formed which vaporizes to form a gas. During the process, the water molecules must be given enough energy that the bonds between the molecules break. This energy is given to convert a liquid into a gas which is known as latent heat. In the heating process, the steam transfers latent heat to a given product. When the work is done steam condenses and becomes condensate. Heating efficiency will suffer if the condensate is not removed as rapidly as possible whether in steam transport piping or a heat exchanger. It is sometimes believed that a load of condensate can be regulated with a regular valve instead of a steam trap by simply adjusting the valve opening manually to match the amount of condensate generated. So it will be wrong by doing it manually. Features of steam trap  Discharges condensate immediately and completely  Does not leak steam even when used for long periods  Can also discharge non-condensable such as air Types of steam trap  Mechanical steam traps  Thermostatic steam traps  Thermodynamic steam traps Advantages of steam trap  Large ports handle high capacities  Cast iron bodies

2.  Modulating ports provide long life  It can handle light or heavy loads  It drains condensate at saturation temperature Applications of steam trap  Modulating loads  Steam humidifiers  Heating main drip traps  Regulators  Tank heaters with modulating temperature Available materials: Cast Iron, Ductile Iron, Cast Steel (A216 WCB, WCC, LCB, LCC, WC6, WC9) Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316], A105 Size: 1/2" to 4" Nominal Pressure: PN10 to PN250 Class: 150 to 1500 Specialityvalve is the greatest Steam Trap Manufacturer in India which provides a variety of shapes, sizes, and thicknesses. We provide 100% customer satisfaction by meeting our customer’s needs. We are one of the most known providers of ferrous and non-ferrous metals https://www.specialityvalve.com/product-category/steam-trap/ Ball float Steam Trap Manufacturer in India: Specialityvalve is a prime Ball Float Steam Trap Manufacturer in India. The ball float steam trap operates by sensing the difference in density between steam

3. and condensate. If the trap is on the right condensate reaching the trap will cause the ball float to rise, lifting the valve off its seat and releasing condensate. The valve is always flooded, and neither steam nor air will pass through it so early traps of this kind were vented using a manually operated cock at the top of the body. Modern traps use a thermostatic air vent which is on the right that allows the initial air to pass the trap is also handling condensate. Ball float steam traps used for secondary heating like coils, vessels, and heat exchangers generate a lot of condensate post-heat transfer. This condensate has a real heat component with cost tagged to it. It is used as feed water for the boiler, saving the cost of heating, and treatment chemicals. The function of the ball float trap is the rising condensate level which elevates the float that opens the valve and discharges the condensate and reverses when the level of condensate drops the valve to close the trap. Advantages of Ball Float Steam Trap  Is resistant to water hammer  It has a large capacity size  An automatic air vent is fitted so the trap can discharge freely Disadvantages of Ball Float Steam Trap  Water hammer can damage  Pressure limit of 125psig  Cooling leg required in some applications Parts of Ball Float Steam Trap  Condensate discharge valve  Drain plug  Thermostatic air vent  Float Applications of Ball Float Steam Trap  Batteries and unit heaters  Drying cylinders  Heating tanks

4. Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron. Available Size: ½” to 48” Class: 150 to 2500 Nominal Pressure: PN10 to PN450 Medium: LNG, Cryogenic application, Water, Air, Steam, Oil Ends: Flanged, Threaded, Buttweld, Socket weld Operations: Lever Operated, Electric Actuated, and Pneumatic Actuated, Gear Specialityvalve is the foremostBall Float Steam Trap Manufacturer in India which are well known for its commitment to quality. All the products are tested by our highly professional team before delivery to clients. https://www.specialityvalve.com/product-category/ball-float-steam-trap/