How to Setup HP Officejet Pro 9015 Printer?

1. How to Setup HP Officejet Pro 9015 Printer? About HP Officejet Pro 9015 setup The 123.hp.com/ojpro9015 is an All-in-One multifunction color printer that can be connected to your devices via a network, USB, or mobile printings services. It delivers high-quality output at high speed. Use only genuine cartridges and recommended papers to prevent quality issues. Simple steps to set up the printer and perform several functions on it are given on this page. Quick Steps for HP OJPRO9015 Printer Setup: 1. Remove the printer from the packaging box and place it on a flat surface. 2. Peel off the plastic tapes from the inside and outside of the 123.hp.com/ojpro9015 printer. Use the power cord to connect the printer to an electrical outlet. 3. If the printer does not start automatically, press its Power button to turn it on.

2. 4. “Set” your language, country, region, date, and time on the control panel. 5. Raise the cartridge access door and lower the front door. The carriage shifts to the center of the access area and stops. 6. Take the new cartridges out of the box and then peel off the protective film. 7. Insert the cartridges into their slots and close the front door. Lower the access door and tap OK on the control panel. 8. Pull the input tray from the bottom of the printer. 9. Place enough papers into the tray and push the stack into it. 10.Move the guides toward the paper stack. 11.Reinsert the input tray into the printer. 12.Touch the OK option on the control panel. The next step is performing the printhead alignment. 13.When a message prompting you to align the printhead appears on the control panel, select OK. 14.The printer prints an alignment page. Keep the page on the scanner glass and scan it. 15.Once the alignment is complete, the Alignment Successful message displays on the control panel. 16.For more info Visit Here: “https://printer-setup.us/how-to-install/ojpro/9015”