1 / 5

EDM Machine Parts Supplier Recommends 5 Maintenance Tips

Ankok is a pioneer in China's electrical discharge machining spare part industry. We are now the leading EDM machine parts supplier and manufacturer for all major brands with a distribution network in more the 20 countries. Connect with us to know more: https://ankok.com/<br>

Download Presentation

EDM Machine Parts Supplier Recommends 5 Maintenance Tips

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EDM Machine Parts Supplier Recommends 5 Maintenance Tips

  2. You will inevitably encounter some failures when processing wire EDM machine. When the machine breaks down, you need to take a few minutes to relax and follow the maintenance steps below before reaching out to your EDM machine parts supplier. The wire EDM machine repairs first externally and then internally Generally the faults outside the system are mainly caused by problems with detection switches, hydraulic components, pneumatic components, electrical actuators, and mechanical devices, which are easier to detect and fix. The maintenance of the EDM wire machine is first mechanical and then electrical Mechanical faults can be found quickly, while the electrical faults are relatively more complex.

  3. The wire cutting machine maintenance is first static and then dynamic If a catastrophic failure occurs after power-on, the danger must be eliminated before power-on. When the machine is in a static state; understand, observe, test, and analysis to confirm that after power-on it will not cause the expansion of the fault and the accidently energies the WEDM. First simple and then complex maintenance of the wire cutting machine When you solve the easy problems first, you are able to tackle the more complex problems more easily. Lastly the regular maintenance principle your trusted EDM machine parts supplier A regular cleaning of the dust inside the electrical cabinet, including the dust on the power resistor, and especially the dust on the bridge stack should be performed after every use of the EDM drilling machine.

  4. Therefore, when searching for EDM machine parts suppliers, it is recommended to start from the details, which comprehensively reflect the current quality of the machines. Truly good machines parts have never been marketed at low prices. After numerous industry shakedowns, why do some EDM machine parts supplier & manufacturers do better and better? It is precisely because of their persistent insistence on quality, just like Ankok. Ankok is a pioneer in China's electrical discharge machining spare part industry. We are now the leading EDM machine parts supplier and manufacturer for all major brands with a distribution network in more the 20 countries. Connect with us to know more.

  5. Contact Information 01 02 Email Address sales@ankok.com 988 Dongfang Avenue, Suzhou 215124, China 03 04 Website Contact No.  +86 512 65801161 https://ankok.com/

More Related