1 / 4

Wavlink AX1800 Extender Setup (3)

If you have any issues regarding your extender, you can contact our toll-free number ( 1-323-471-3045) or<br> email: support@mywifiextension.net<br>

Lisa85
Download Presentation

Wavlink AX1800 Extender Setup (3)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wavlink AX1800 Extender Setup The Wavlink AX1800 extender Setup is a powerful device designed to enhance your existing Wi-Fi coverage, providing a stronger and more stable wireless connection throughout your home or office. Setting up the extender might seem a bit difficult at first, but with the right guidance, you can have it up and running in no time. This guide will walk you through the Wavlink AX1800 extender.

  2. Wavlink AX1800 Extender: Manual Setup Here's a general guideline for manual setup: Start by plugging in your Wavlink AX1800 extender to a power outlet in an area where your existing Wi- Fi signal is weak. Navigate to your Wi-Fi settings on your computer or mobile device. Look for the "Wavlink_EXT" network. Connect to this network. Open a web browser and type ap.setup into the address bar. Enter the default login credentials if asked. To scan for available Wi-Fi networks, follow the on- screen instructions. Choose your existing Wi-Fi network from the list, and then enter your Wi-Fi password. Once configured, move the extender to a location where it can effectively boost your Wi-Fi signal.

  3. Wavlink AX1800 Extender Setup via WPS Method Setting up the Wavlink AX1800 Extender using the WPS (Wi-Fi Protected Setup) method is often quick and straightforward. Here's a step-by-step guide: Plug in your Wavlink AX1800 extender and ensure it's powered on. Locate and activate the WPS button on your extender. Within 2 minutes, press the WPS button on your main router as well. Then let the extender establish a connection with the router. After successful connection, the extender's LEDs will display a steady light.

  4. Performing a Factory Reset on Wavlink AX1800 Extender Follow the following steps: Find the reset button on the extender (often a small hole labeled "Reset"). Press and hold the reset button for around 10-15 seconds using a paperclip or similar instrument. The LED lights on the extender will usually flash during this time. After holding the reset button, release it. The extender will restart and return to its default configuration. If you have any issues regarding your extender, you can contact our toll-free number (+1-323-471-3045) or email: support@mywifiextension.net

More Related