1 / 4

Victony AC1200 Extender Setup (2)

If you have any issues regarding your extender, you can contact our toll-free number ( 1-323-471-3045) or<br> email: support@mywifiextension.net<br>

Lisa85
Download Presentation

Victony AC1200 Extender Setup (2)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Victony AC1200 Extender Setup The Victony AC1200 extender Setup is a powerful device designed to boost your existing WiFi signal and extend its coverage to areas with weak or no connectivity. Setting up the extender properly is crucial to ensure seamless and reliable extended WiFi coverage. This guide will walk you through the setup process.

  2. Configure Victony AC1200 Extender Using WPS The WiFi Protected Setup (WPS) method allows you to quickly and securely Victony AC1200 extender Setup to your existing WiFi network. Follow these steps: Plug in the extender near your router and power it on. Press the WPS button on the extender for a few seconds until the WPS LED starts flashing. In under 2 minutes, press the WPS button on your router. The WPS LED on the extender should turn solid, indicating a successful connection. You have successfully configured your Victony AC1200 extender using WPS.

  3. Mastering the Manual Configuration of Victony AC1200 Extender The manual approach for Victony AC1200 extender setup is accessing its web-based setup page and manually configuring it. Perform the following actions: Connect the extender to a power source and activate it. Connect your device (e.g., laptop or smartphone) to the extender's WiFi network . Launch a web browser and input either "ap.setup" or the IP address "192.168.10.1" into the address bar. Follow the onscreen instructions to scan for available WiFi networks and select your network. Enter your WiFi password and complete the setup.

  4. How to Perform a Factory Reset on Your Victony AC1200 Extender ? If you need to reset the extender to its default settings, follow these steps: Locate the Reset button on the extender (usually a small hole). Utilize a paper clip or pin to press the Reset button and hold it for approximately 10 seconds. Release the button when the LEDs on the extender start blinking. The extender will restart. Note: Keep in mind that a factory reset will remove all custom settings from the extender, including network names and passwords. Make sure you have this information before doing the reset. If you have any issues regarding your extender, you can contact our toll-free number (+1-323-471-3045) or email: support@mywifiextension.net

More Related