1 / 1

Trade Show Cases

Usually these trade show cases can weight from 80 to 120 lbs each when full which is impossible to carry. So wheels are critical.

LJB
Download Presentation

Trade Show Cases

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Trade Show Cases - Examine Your Options Most portable trade show display manufacturers provide cases to ship their products. Some of them purchase premade cases from case manufacturers and some make their own cases. Either way there must be a case involved to ship tradeshow materials. We will look at some of the types of cases and examine the pros and cons of these various methods of protecting trade show display materials. Banner stand cases Most banner stands are constructed from aluminium tubes with retractable graphics screens inside that pull out and have a shock corded tube that supports its height at around 90" tall. Most of these aluminum tubes are around 30-35 inches long with a 4-5 inch diameter with a weight of under 20 lbs.. Our experience is that any of the molded tube cases that fit the dims of the banner stands will work fine with these displays. It is important that adequate foam padding be added to keep the contents from sliding around inside the case causing damage. Folding panel displays The stackable folding panel trade show display is designed by the manufacturers to fit in a UPS able case. So most of these displays are roughly 45" Long x 25" wide x 6-9" deep (depending on the number of panels). The type of cases most manufacturers use for these systems are thermo-molded shippers with lids that fit down over the bases and nylon straps that pull this lid down tight on the base holding the contents secure. Look for molded in handles that cannot be knocked off, steel buckles on the nylon straps (not plastic that can be broken easily and look for cases with wheels on one end so that the cases can be pulled on the wheels. Usually these trade show cases can weight from 80 to 120 lbs each when full which is impossible to carry. So wheels are critical.

More Related