Just Link shares the information about, how to install a gyprock ceiling. Here are the steps to installing a gyprock ceiling.
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
Before you start working on the ceiling, there are a few things you need to know. First, you need to get all the necessary equipment and tools. It is never a good idea to leave in the middle of work to head down to a store for purchasing things you have forgotten.
For this, you will be requiring a spirit level. Before you go ahead with the measurements, you should check the wooden trusses. They should be perfectly leveled. This will ensure that your ceiling is one smooth and balanced plane after the gyprockboards have been attached.
Now that you have ensured the levelness of the trusses, you can go ahead and measure the ceiling’s length. Use the tape measure for measuring from one internal corner to the other internal corner. Mark out these lengths on the gyprockboards. Once done, you can transfer those measurements to the gyprock sheet.
You will have to measure the width of the room as well. This will help you understand how many gyprockboard sheets will be necessary. Mark the points where the sheets will have to be cut.
For cutting the gyprockboard sheets, you need the measuring tape and a utility knife. Use the knife for making a finger gauge first before running the knife along the gyprockboard carefully for a precise cut.
Once done, apply glue thickly to the battens at regular intervals. Then, you can apply the pasteboards. Screw them into place. Make sure that you are not screwing where you applied glue.
The above guide should be of help in the installation of gyprockboards. If you think it is too much for you, you can hire a gyprock ceiling Sydney to take care of the job.