MultiDyne Products and system solutions are currently used by a wide variety of government agencies (city, state and local), both in the U.S. and abroad (The Aerospace Division?of the Australian Defense Science and Technology Organization). Fiber-optic technology has been used by government facilities for many years and MultiDyne has supported those efforts in a variety of ways. For more information, Visit here:- \nhttp://www.multidyne.com/
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
Video & Fiber Optic Systems
The CWDM Mux Demux covers all channels from 1270nm to 1610nm in 20nm increments.
Without replacing any infrastructure, it totally supports data rates up to 180 Gbps by being
completely protocol transparent. The main fields of applications are the use in SDH (STM-1,
STM-4, STM-16, STM- 64), IP (Fast Ethernet, Gigabit Ethernet, 10 Gigabit) ATM and
storage (1G, 2G, 4G, 8G, 10G Fibre Channel) networks
The VB Series, Build a Box provides a solution for any combinations of signal transport over
fiber. With the VB- 6, VB-3 and the DogBone, a unit can be created to your specification by
populating the case with any compliment of VB-Cards. Each card’s I/O can be sent or received
over its own disparate fiber, or all signals in the box can be multiplexed onto just one fiber.
The VF-9000 is a 1 Rack Unit, very high density video fiber optic transport platform. It has up
to 36 optical I/O (18 SFP Ports) and 36 Copper, BNC I/Os. The configuration of input vs. output
is configured automatically, following the I/O of the SFP installed. If a dual TX SFP in inserted
in a slot, the two BNCs at the back of the slot become inputs. If a dual RX SFP is inserted in a
slot, the two BNCs at the back of the slot become outputs. And finally, If a transceiver is
inserted into a slot, the two BNCs at the back of the slot become an input and an output.
The Multidyne GenPlex-12G can be strategically placed in
the middle of long distance runs in order to regenerate the
signal. With two inputs and two outputs, the GenPlex-12G
is ideal for 10G data networks, as well as new 12G SMPTE
camera chains, allowing the regeneration of a send and
Regenerate 12G optical signals
Data rate 1Gbps to 12Gbps.
Distance range up to 80Km.
Power by 12VDC
The FS Series helps engineers send and receive more optical signals over fewer fibers.
When fiber is limited in metropolitan areas, stadiums and facilities, it can be a challenge
or even impossible to get every optical signal on a CWDM wavelength for single fiber
transport. The FS12G-Seiries offers wavelength ignostic inputs, giving the ability to
multiplex any digital optical signal over one fiber in either direction.
The Multidyne Fiber Saver is an innovative solution for combining as many as 18 HD–
SDI feeds, or optical signals of any wavelength onto one single–mode fiber. Mobile trucks,
OB vans and facility managers can now offer expanded video and audio capacity when
hosting major events without having to deal with additional fiber cabling and the
associated costs. The Multidyne Fiber Saver transport accepts SDI video signals ranging
from 270Mbs up to 3Gbs and converts them into optical signals.
Coarse Wave-Division Multiplexer for 4, 8, 16 & 18 Channels.
-Support for 4, 8, 12, 16 and 18 optical channels over ONE fiber
-20 nm channels spacing for standard CWDM
-Epoxy-free optical path for durability and reliability
-Thin-film filter technology used for low insertion loss and high isolation
-Systems available to support either Multimode or Singlemode fiber
CONTACT INFORMATION:- -
Video and Fiber Optic System
10 Newton Place, Hauppauge, New York 11788
Ph: 1 877-685-8439
For more information please visit our website:-