20 likes | 35 Views
Get the simple instructions to perform Trendnet Ac3200 Tew-828dru V1.0r router setup by doing a hardware setup initially and then by using internet setup wizard.
E N D
Trendnet Ac3200 Tew-828dru V1.0r Router Setup - Quick Steps Trendnet AC3200 TEW-828DRU V1.0R is a wireless router that produces three concurrent wireless networks. This router has high-performance Gigabit ports, a 1 GHz dual-core processor, six high gain antennas, high power amplifiers, and a SuperSpeed USB 3.0 share port. One key advantage is it is easy to perform the Trendnet AC3200 TEW-828DRU V1.0R router setup. Router Features Easy Setup Simultaneous Tri Band SmartConnec Technology Pre-Encrypted Wireless Wireless Coverage Targeted Beamforming VPN Support Router Package Contents Power adapter (1.2V, 2A) CD-ROM with User's Guide RJ-45 Ethernet cable (1.5m/5ft) Multi-Language Quick Installation Guide
Router Setup To perform the Trendnet AC3200 TEW-828DRU V1.0R router setup, carry out the simple steps given on this page Hardware Installation First, check if you can access the Internet when you have connected your modem directly to your computer. Turn off the modem and remove the network cable connected between the modem and the computer. Establish a connection between the modem and your router's Internet port. Using an RJ-45 Ethernet cable, connect the router's LAN port and the computer's Ethernet port. Take the power adapter and plug it's one end into the router's rear port. Connect the power adapter's other end to a power outlet. Wait until the router turns on. Turn on the modem connected. On the router's front panel, make sure both the Power and Internet LEDs are lit without blinking. Internet Setup Wizard After completing the hardware installation, carry out the following how to setup Trendnet AC3200 TEW-828DRU V1.0R router steps. On the computer, open a browser like Internet Explorer, Firefox, Chrome, or Safari. If you are configuring your router for the first time, the Trendnet AC3200 TEW- 828DRU V1.0R router installation wizard will appear automatically. Note: If you have already completed the router configuration, the wizard will not appear automatically. In such a case, enter the router's IP address in the address bar to access the login page. Enter your login credentials to open the router's web management page. Click Advanced -> Setup -> Wizard to start the router installation. Read More