How To Perform The Asus RT-N10 Router Setup?

1. How To Perform The Asus RT-N10 Router Setup? Asus RT-N10 is a wireless three-in router powered by Broadcom BCM5356A1 @ 300 MHz chipset. This router provides better network coverage and is compatible with the IEEE 802.11b/g/n wireless network standard. It has four LAN ports, one WAN port, and supports up to 4 guest SSIDs. Configuring the router for the first time is quite easy. Here you’ll find the quick and simple steps to perform theAsus RT-N10 router setup for the first time. Along with the router, you can find the components such as a power adapter, RJ45 cable, and a quick start guide in the product box.As discussed above, you can set up this router in three different modes such as router mode, repeater mode, and AP mode. The procedure for the physical setup will vary based on the modes. The below section explains all three modes in detail. Settings Up Router In Repeater, Router, & AP Modes Router Mode Physical Setup Connect your modem to the Asus RT-N10 router using an Ethernet cable. Using another Ethernet cable, connect your computer to the router. Make sure to connect the cable securely.

2. After connecting the network cable, connect the power cables to the router and modem. Turn on the router, modem, and your computer. Configuring Router Settings Using QIS Web Page Open your computer’s default browser. Now, the Asus router’s QIS page will launch automatically. In case the page fails to launch, then turn off your browser’sproxy settings if enabled. When prompted, choose the IP Sharing mode and click the OK button. Generally, the router’s QIS page will detect your internet connection automatically. Configure the router settings by following the on-screen instructions. Read More