How To Configure Tenda F300 Router Setup? - Connect Ethernet

1. How To Configure Tenda F300 Router Setup? Tenda F300 is a wireless router designed to be set in Client Router mode to support a WISP connection. The Tenda F300 router setup is quite simple if you follow the quick steps given below. Before starting, verify that your modem is working properly and you are getting a stable Internet connection from it.  Unpack the router from the product box and place it on a flat surface closer to the modem.  Ensure that your modem is turned off.  Connect your modem and the router using the supplied Ethernet cable. The Ethernet cable from the modem should be plugged into the router's WAN  Next, take another Ethernet cable and connect it to the router's LAN Connect the other end of the cable to your Windows computer.  Turn on your modem and router.  Observe the LEDs on the router and ensure that they are functioning properly.  After completing the Tenda F300 router set up using the network cables, move on to your computer.  Open the default browser and enter your router's IP address in theURL. Read More