How To Configure Belkin Router Without Cd | 3 Easy Steps

1. Configure Belkin Router Without Cd You can set up and install the Belkin router by using an installation disc or download the firmware from the router’s web-based setup page.Proceed with the steps given below to configure Belkin router without CD. Configure Belkin Router Without Cd Step 1: Preparing your internet modem for connection Make sure that you have a fast internet connection to set up the Belkin router without the installation CD. Connect the modem to your computer directly using an Ethernet cable without connecting the Belkin router. Ensure that your modem is connected to a power source to configure Belkin router without CD. If you can access the internet, unplug the power cable from the modem. Step 2: Connecting router and modem Plug in an Ethernet cable to the WAN port of the Belkin router. Connect the Ethernet cable’s other end to your modem. Now, plug an Ethernet cable into the LAN port of the Belkin router and connect the other end to your computer. The LED light on the router will blink and turn solid blue. If your router LED light does not turn blue and is constantly blinking in Amber, check whether you have made the connection properly. If you still face the issue, power cycle the modem and turn it on after some time. Read More...