4 Easy Ways To Solve Comcast Router Not Working

1. Comcast Router Not Working Use the below given methods to solve Comcast router not working issue. Let me just start by saying that Comcast does not make routers. However, some routers are supported by Comcast. They are: Netgear routers Arris routers Motorola routers Tp-Link routers Linksys routers The first step to do when your router malfunctions is to reset the router. Disconnect the power supply from the router and wait for at least 20-30 seconds before plugging the router back into the power source. If this does not resolve the working condition of the router, let me walk you through the Comcast router not working troubleshooting methods to help you solve the issue. Method 1: Test The Internet Connection This method is quite simple. If you are using a wireless router, take an Ethernet cable and connect one end of the cable to the computer and the other end to the wireless router. Restart the computer and try to access the router configuration page. You can easily check if the internet connection is working using a wired interface. If you find out the wired connection has failed, you can contact your Internet service provider for further assistance. The internet connection issue can be resolved only by your ISP. Method 2: Reset The Router

2. If the router is working fine with the wired connection, undoubtedly, the error is with the router. You have to reset the router to troubleshoot such unknown issues. Follow the directions as follows: Connect the computer to the wireless router using an Ethernet cable. Open the default browser on the computer and enter the router login URL or the router IP address in the address bar. Once you gain access, you will be prompted to enter the default login credentials. Username: admin Password: password / admin Logging in will open the router setup configuration page where you can make changes to the router’s settings to solve Comcast router not working issue. Navigate to the Maintenance tab on the left side of the router configuration page. Under the Maintenance tab, select Settings backup. The Settings backup section will have three options. Select the Revert to factory default settings option and click the Erase button. The router settings will be reset, and you will have to configure your router from scratch. Read more...